Stove Dimensions - Century Jefferson Homeowner's Installation And Operating Manual

Jefferson Direct Vent/Natural Vent Stove Dimensions
See Page 6 for Flue Collar
Centerline Dimensions.
Fig. 1 Jefferson dimensions.
The Jefferson stove is shipped from the factory as a Direct Vent Gas Heater. This heater may be converted
into a Natural Vent unit in the field. If a Natural Vent Heater is desired, the CFM Corporation Z31B00 FSD-
HAG Draft Hood must be directly installed to the top of the unit according to the installation instructions.
The Draft Hood Adapter is available in the 7FSDHASK stove kit or as a separate item.
When the Jefferson stove is converted to Natural Vent, it uses 4" vent pipe. For aesthetic purposes the
CFM direct vent system may be used up to the ceiling.
30004177
28���"
(724 mm)
24"
(610 mm)
Attention
Jefferson Direct Vent /Natural Vent Gas Heater
Valve
Inlet C L
3"
(76 mm)
(368 mm)
8"
(203 mm)
ST205
FDV28
dimensions
12/3/99 djt
14���"
4188
5