Fig. 7: Position Of The Rating Plate - ABB HT607538 Operation Manual

Operation Manual / TPS44-H.. - TPS52-H..
2 Safety / 2.8 Turbocharger rating plate
Explanations regarding the rating plate
The recommended inspection and replacement intervals and the corresponding operating
limits are jointly defined with the enginebuilder. This information is specific to the system.
Operation above the indicated values n , t can considerably shorten the recommended
Bmax Bmax
replacement intervals. In such cases, we recommend contacting the nearest ABB Turbochar-
ging Service Station.
n , t normally apply only when running at overload (110 %) during trials on the engine
Mmax Mmax
test bed. These limit values can also be permitted during operation for special applications.
Operation above n and t is not permitted.
Mmax Mmax
Non-observance of the recommended inspection and replacement intervals increases the
risk of unpredictable component failures.
For operating limits, refer to the Operation Manual title page or the rating plate on the tur-
bocharger.
Position of the rating plate
The rating plate (01) is attached at the top on the bearing casing of the turbocharger.
Fig. 7: Position of the rating plate
© Copyright 2021 ABB. All rights reserved. HZTL4037_EN Rev.G June 2021