AEE DW12 User Manual

Table of Contents

Download this manual

1 Preparing the Repeater

DW12 repeater is a wireless communication device that works in the 2.4GHz frequency

band, and is used to increase the effective communication distance between the mobile

device and AP10. Communication distance is affected by the surrounding environment, such

as blockages due to trees, signal reflection by buildings, interference by other same

frequency bands, etc., affecting effective communication distance. Before flight, make sure

the repeater works properly, otherwise the connection cannot be established between the

[5] Charging Port (Micro USB port)

Indicates Repeater's WiFi status

WiFi Indicator

Blue light remains ON for 30 seconds

Blue light blinks slowly

Power Indicator

Indicates Repeater's power supply status

Power Indicator

WIFI REPEATER

DW12

User manual

mobile device and AP10.

[2] WiFi Indicator

Description

WiFi repeater is working properly.

WiFi repeater is successfully paired

Description

[3] Lock screw

[6] Pairing Button

[4] Power Switch

[7] Base

Table of Contents

Do you have a question about the DW12 and is the answer not in the manual?

Page 1 User manual 1 Preparing the Repeater DW12 repeater is a wireless communication device that works in the 2.4GHz frequency band, and is used to increase the effective communication distance between the mobile device and AP10. Communication distance is affected by the surrounding environment, such as blockages due to trees, signal reflection by buildings, interference by other same frequency bands, etc., affecting effective communication distance.
Page 2 Green light remains ON Repeater power supply is normal. Red light blinks Repeater is charging, or repeater power is running out, please charge as soon as possible. Red light remains ON Charging is completed. ※ It is not recommended to turn on the repeater while it is charging. Pairing Button When the repeater is on, long press the Pairing button for 2 seconds, the repeater will automatically restart for code re-pairing.
Page 3 Check battery status In AEE AP APP camera interface, you can display and view AP10 power information. Video You can see AP10 power information on the upper left corner of the camera interface. AP10 with FCC ID: YVV-AEEAP100001.
Page 4 FCC Information and Copyright This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.