Presetting Radio Stations; Tuning To Preset Stations; Deleting The Preset Stations; Deleting All The Preset Stations - LG ARX9500 Owner's Manual

High performance 3d av receiver system
Hide thumbs Also See for ARX9500:
Table of Contents

Advertisement

Presetting radio stations

You can preset up to 50 FM stations.Then you
can easily tune in the stations you often listen
to.
1. Rotate INPUT SELECTION to select tuner
(FM). Or press RADIO with the remote
control to select tuner (FM).
2. Tune in the station that you want to preset
using Automatic tuning or Manual tuning.
3. Press ENTER ( ).
A preset number fl ashes in the display
window for a few seconds. When a preset
number fl ashes, do the step 4.
4. Press PRESET - or PRESET+ to select a
preset number you want.
If a preset number is not fl ashed before you
select the preset number, start again from
the step 3.
5. Press ENTER ( ) again.
The station is stored to the selected preset
number. If a preset number is not fl ashed
before you press ENTER ( ), start again
from the step 3.
6. Repeat the steps 2 to 5 to preset another
station.
NA9530P-FH.DZAFLLK_ENG_MFL67781456.indd 29
NA9530P-FH.DZAFLLK_ENG_MFL67781456.indd 29

Tuning to preset stations

Before tuning to preset stations, make sure you
preset radio stations. (Page29)
1. Rotate INPUT SELECTION to select tuner
(FM). Or press RADIO with the remote
control to select tuner (FM).
2. Press PRESET - or PRESET+ repeatedly to
select the preset station you want.
Each time you press the button, you can
select a preset station.

Deleting the preset stations

You can delete a preset station you want.
1. Rotate INPUT SELECTION to select tuner
(FM). Or press RADIO with the remote
control to select tuner (FM).
2. Select the preset station to delete by
pressing PRESET - or PRESET+.
3. Press CLEAR.
4. Press CLEAR again while the preset number
fl ashes in the display window for a few
seconds.
The preset station is deleted.
5. Repeat the steps 2 to 4 to delete another
preset station.

Deleting all the preset stations

1. Press and hold CLEAR for about two
seconds.
"ERASE ALL" appears on the display window.
2. Press CLEAR again while "ERASE ALL" is
displayed.
All the preset stations are cleared.
29
Operation
4
2013-02-25
2013-02-25
3:59:47
3:59:47

Advertisement

Table of Contents
loading

This manual is also suitable for:

Arx9500wS94p4-fS94p4-sS94p4-cS94p4-w

Table of Contents