Advertisement
Table of Contents
C A N S E C
RF MODULE &
SECURITY PRODUCTS
1 Description
The T306 Series Transmitter is ideal for the opening, closing the garage door and control the winch of
hoist machine. The Transmitter is available in hand-held and transmits a unique code each time the switch
is closed to provide a secure control. The transmitter is powered by a 12-volt battery and a blue indicator
light when the transmitter is activated.
T306
2 Specifications
DESCRIPTION
FREQUENCY
EMITTED RADIO POWER
POWER CONSUMPTION
OPERATING TEMPERATURE
DIMENSIONS
CERTIFICATION
3 Battery Replacement
1.Remove screw from back of transmitter.
2.Separate housing and install a fresh 12-Volt/23A
properly polarity.
3.Reassemble housing and replace screw.
T306 / T306-2
T306-2
SPECIFICATION
434MHz
<5dBm
Max 9mA
-10˚C~+55˚C
75mmx38mmx13mm
FCC
ALKALINE battery making sure to observe
TRANSMITTERS
USER'S
HAND HELD DIGITAL TRANSMITTER
T306
GUIDE
T306-2
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Cansec T306
- Page 1 HAND HELD DIGITAL TRANSMITTER 1 Description The T306 Series Transmitter is ideal for the opening, closing the garage door and control the winch of hoist machine. The Transmitter is available in hand-held and transmits a unique code each time the switch is closed to provide a secure control.
- Page 2 4 FCC Compliance 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.
Need help?
Do you have a question about the T306 and is the answer not in the manual?
Questions and answers