NightStick XPP-5570G Instruction Manual

Instruction Manual
XPP-5570
THANK YOU FOR SELECTING THE NIGHTSTICK XPP-5570
INTRINSICALLY SAFE PERMISSIBLE ANGLE LIGHT!
PLEASE SAVE THESE INSTRUCTIONS
Please read these instructions before using your Nightstick XPP-5570
Intrinsically Safe Permissible Angle Light. They include important safety
information and operating instructions.
THE XPP-5570 IS APPROVED FOR USE
Permissible Nightstick XPP-5570 Flashlight/Floodlight
APPROVAL No. 20-A150005-0
TESTED FOR INTRINSIC SAFETY IN METHANE-AIR MIXTURES ONLY
WARNINGS: Do not charge in hazardous location. MSHA approved for use with Bayco
Li-ion Battery Pack 5572-BATT or Primary 5570-BATT Battery Pack containing 6 AA
Energizer Type EN91 or L91 batteries. Replace the Battery Pack in fresh air only. Do not
mix batteries from different manufacturers or different types. Battery Pack to be replaced by
a qualified technician only. The Model Nightstick 5570 must not be opened in areas where
permissibility is required. Substitution of components may impair Intrinsic Safety.
Ex ia FLASHLIGHT FOR USE IN HAZARDOUS LOCATIONS
UL listed for use with Bayco Li-ion Battery Pack
5572-BATT or Primary 5570-BATT Battery Pack
containing 6 AA Energizer Type EN91 or E91 batteries.
E 467756
0359
WARNINGS - INTRINSICALLY SAFE
y WARNING: Use only the approved non-rechargeable batteries listed
below.
y WARNING: Do NOT attempt to use rechargeable AA batteries with this
light.
y WARNING: To prevent ignition of a hazardous atmosphere, do not open
the battery compartment in the hazardous environment. This task must
ONLY be performed in an area known to be non-hazardous.
y WARNING: When exchanging batteries, use only Energizer EN91 or
Energizer E91 batteries.
y WARNING: To prevent ignition of a hazardous atmosphere, the AA
batteries must only be exchanged in an area known to be non-hazardous.
y WARNING: To reduce the risk of explosion, do not mix new non-
rechargeable batteries with used non-rechargeable batteries, or mix non-
rechargeable batteries from different manufacturers.
y WARNING: Substitution of components may impair intrinsic safety.
SPECIAL INSTRUCTIONS FOR INTRINSIC SAFETY
y For personal safety, always confirm the rating of any known hazardous or
potentially hazardous location where the Angle Light is to be used.
POWERING THE XPP-5570
The XPP-5570 Intrinsically Safe Light is powered by the Nightstick 5570-
BATT Non-Rechargeable Battery Carrier and 6 - AA Energizer EN91 or
Energizer E91 Batteries.
WARNING: Do not use any other type of non-rechargeable battery with
this light.
WARNING: Do not use rechargeable AA batteries with this light.
Bayco Products, Inc. • 640 South Sanden Blvd. • Wylie, TX 75098 • 1-800-233-2155 • 1-469-326-9400 • www.mynightstick.com
CLASS I DIV I GRPS A-D T3
CLASS II & III DIV I GRPS E-G
CLASS I ZONE 0 Group IIC T3
CLASS II ZONE 20 Group IIIC T3
-20ºC ≤ Tamb ≤ +70ºC
Included in the box - Compris dans la boîte - Incluido en la caja
5570-BATT NON-RECHARGEABLE BATTERY CARRIER
WARNING: The Nightstick 5570-BATT Non-Rechargeable Battery Carrier
is a proprietary shape and design and will only fit in the XPP-5570 or
XPR-5572 Angle Lights. Do not attempt to use this battery pack in any
other light. Do not attempt to use any other battery pack in this light.
y The Nightstick 5570-BATT Non-Rechargeable Battery Carrier is designed
to fit 6 AA batteries. In order to maintain the XPP-5570's Intrinsically Safe
Permissible rating, the only AA batteries certified for use with this light are
the Energizer EN91 or Energizer E91.
y Do not attempt to use any other brand or model of AA batteries with this
light.
y Do not attempt to use any type of rechargeable AA batteries with this light.
Removing the Non-Rechargeable Battery Carrier
Image 1
WARNING: To prevent ignition of a hazardous atmosphere, do not open
the battery compartment in the hazardous environment. This task must
ONLY be done in an area known to be non-hazardous.
y To access the 5570-BATT Non-Rechargeable Battery Carrier, unscrew
the Torx Head Screw located on the Battery Compartment Door on the base
of the light using the included Torx Head Wrench. (Image 1)
NOTE: The Battery Compartment Door Torx Screw utilizes a design
that prevents the screw from falling out of the door. Do not attempt to
remove the screw. (Image 2)
y Open the Battery Compartment Door with enough clearance to allow the
5570-BATT Non-Rechargeable Battery Carrier to slide out. (Image 3)
Installing or replacing the batteries
Image 4
INS-XPP5570-16
Image 2 Image 3
Image 5 Image 6