Delay End; My Cycle; Sound - Samsung WF42H5000AW/A2 User Manual

Delay End

You can set the washing machine to start your wash automatically at a later time, choosing a delay time.
The hour displayed indicates the time at which the wash will be ended.
1. Set your wash cycles.
2. Press the Delay End button repeatedly until the delay time is set.
3. Press the START/PAUSE button. The "Delay End
counting down until it reaches the set time.
4. To cancel a Delay End function, press the POWER button and then turn the washing machine on
again.

My Cycle

Lets you save a custom wash cycle (temperature, spin, soil level, etc.) and then recall and use it
with one button convenience.
To save a cycle and selected options as your My Cycle, follow these steps:
1. Select the cycle using the Cycle Selector dial.
2. After cycle selection, set each option.
See page 38~39 for available option settings with each cycle.
3. You can then store the selected cycle and options by pressing and holding the My Cycle
button for longer than 3 seconds. The cycle and options you select will be displayed the next
time you choose the My Cycle function.
4. Press the My Cycle button to load and use the saved My Cycle options. The "My Cycle" light
will indicate activation. Also, the chosen course and option lights will flicker
You can change the "My Cycle" settings by repeating the process above.
The washer displays the last settings used the next time you choose "My Cycle".
If you press My Cycle and release it within 3 seconds, the previously saved cycles and
options appear. If you press and hold My Cycle for 3 second or longer, the currently set
cycles and options are saved and the LED blinks for 3 seconds.

Sound

The Sound Off function can be selected during all courses.
BETTER_WF42H5000-03397A-14_EN.indd 23
" indicator will be lit, and the clock will begin
English _23
2018/8/14 11:37:49