Control Panel - Panasonic NN-ST696S Operating Instructions Manual

Display Window
Popcorn Pad
(page 17)
Power Level Pad
(page 15)
Inverter Turbo Defrost
(page 18)
Quick 30 Pad
(page 16)
Number Pads
Timer Pad
(page 23)
Stop/Rest Pad
Before cooking: One tap
clears all your instructions.
During cooking: One
tap temporarily stops the
cooking process. Another
tap cancels all your
instructions, and time of
day or colon appears in
the Display Window.
Beep Sound:
When a pad is pressed correctly, a beep will be heard.
If a pad is pressed and no beep is heard, the unit did not or cannot accept the instruction.
When operating, the oven will beep twice between programmed stages. At the end of any
complete program, the oven will beep 5 times.
Note:
• If there is no operation for 6 minutes after setting cooking program, the oven will automatically
cancel the cooking program. The display will return to clock or colon display.
• If no beep sound is heard, check "beep ON/OFF" function feature (see page 14).
PA_F0003BT61CP_Eng.indd 12

Control Panel

Pad
12
* The control panels
of NN-ST696S/
ST676S have same
key layout.
Sensor Reheat Pad
(page 20)
Sensor Cook Pad
(page 20)
Keep Warm
Pad (page 16)
More Pad
(page 17)
Less Pad
(page 17)
Clock Pad
(page 13)
Start Pad
After cooking program
setting, one tap allows
oven to begin functioning.
If door is opened or Stop/
Reset Pad is pressed
once during oven
operation, Start Pad must
be pressed again to restart
oven.
2017/12/20 9:35:54