Advertisement
SCMTSA-1LHD
Operation and Maintenance Manual
1''
WARNING
Before operating this tool, all operators should study this manual to understand and follow the safety warnings and instructions. Keep these instructions
with the tool for future reference. If you have any questions, contact your Sidchrome
®
representative or distributor.
NS.1800F
1'' Air Impact Wrench
NU-NS.1800F/0110
SCMTSA-1LHD.2013.A
788272
Advertisement
Table of Contents
Related Manuals for Sidchrome SCMTSA-1LHD
Summary of Contents for Sidchrome SCMTSA-1LHD
- Page 1 WARNING Before operating this tool, all operators should study this manual to understand and follow the safety warnings and instructions. Keep these instructions with the tool for future reference. If you have any questions, contact your Sidchrome ® representative or distributor.
- Page 2 Safety Instructions Contact Information WARRANTY Sidchrome air tools are warranted for TWO (2) years from the date of purchase, excluding normally wearing parts such as vanes, gaskets and o-rings; 1. Unless otherwise specifi ed, this warranty does not cover: (a) modifi ed, abused, neglected, accidentally damaged or excessively worn products, or products that have become damaged or defective as a result of improper use;...
- Page 3 INTRODUCTION e Sidchrome SCMTSA-1LHD is a precision-built tool, designed for high torque assembly and disassembly of ® cient, dependable service when used correctly and with care. As with any ne power tool, for best performance the manufacturer’s instructions must be followed. Please study this manual before e instructions on installation, operation and maintenance should be read carefully, and the manuals kept for reference.
- Page 4 Stop using any tool if discomfort, tingling feeling or pain occurs. Seek medical advice before resuming use. • Use impact rated accessories recommended by Sidchrome ® • Th is tool is not designed for working in explosive atmospheres.
- Page 5 GETTING STARTED • Always operate, inspect and maintain this tool in accordance with all regulations (local, state, federal and country) that may apply to hand-held / hand-operated pneumatic tools. • For safety, top performance, and maximum durability of parts, operate this tool at 90 psig (6.2 bar / 620 kPa) maxi- mum air pressure at the inlet with 3/4’’...
Need help?
Do you have a question about the SCMTSA-1LHD and is the answer not in the manual?
Questions and answers