Timer; Maintenance And Service; Indoor Unit - LG JTNQ36GNLE5 Owner's Manual

OWNER'S INSTRUCTION
24

Timer

Setting the Current Time
1. Press the SET/CLEAR button for 3 seconds.
2. Press TIME SETTING buttons until the desired time is set.
3. Press the SET / CLEAR button.
!
NOTE
Check the indicator for A.M. and P.M.
Timer Setting
1. Press the TIMER button to turn timer on or off.
2. Press TIME SETTING buttons until the desired time is set.
3. Press the SET / CLEAR button.
!
NOTE
Select one of the following 3 types of operation.
Timer Sleep
To cancel the Timer Setting
• If you wish to cancel all timer setting, press the SET/CLEAR button.
• If you wish to cancel each timer setting, press the TIMER button to turn timer sleep or on or off
as you want.
And then press the SET/CLEAR button aiming the remote controller at the signal receptor.
(The timer lamp on the air conditioner and the display will go off.)

MAINTENANCE AND SERVICE

Indoor Unit

Grille, Case and Remote Control
- Turn the system off before cleanining, To
clean, wipe with a soft, dry cloth. Do not use
bleach or abrasives.
!
NOTE
Supply power must be disconnected be-
fore cleaning the indoor unit.
Timer ON
-
Remove the Air filters.
Take hold of the tab and pull slightly forward
to remove the filter.
! CAUTION
When the air filter is to be removed, do
not touch the metal parts of the indoor
unit.
It may cause an injury.
OFF
Timer OFF