Table of Contents
Advertisement
Quick Links
Universal Tool
™
General Safety Information & Replacement Parts
TABLE OF CONTENTS
General Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Air Compressor and Air Tool Safety . . . . . . . . . . . . . . . . . . . 2-3
Tool Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Maintenance / Lubrication . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Service Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
WARNING: Risk of injury to persons. Read and
understand operation instructions. Always become familiar
with all the instructions and warnings before operating any
pneumatic tool.
ADJUSTABLE SHUT-OFF SCREWDRIVER
SCREWDRIVERS
: This product contains lead, a chemical known to
WARNING
the State of California to cause cancer and birth defects or
other reproductive harm. Wash hands after handling.
: This product contains chemicals known to
WARNING
the State of California to cause cancer and birth defects or
other reproductive harm. Wash hands after handling.
FLORIDA-PNEUMATIC.COM
Please contact 1-800-356-3392 for further assistance.
UT8963ATT-5
Advertisement
Table of Contents
Related Manuals for Universal Tool UT8963ATT-5
Summary of Contents for Universal Tool UT8963ATT-5
-
Page 1: Table Of Contents
UT8963ATT-5 Universal Tool ADJUSTABLE SHUT-OFF SCREWDRIVER SCREWDRIVERS ™ General Safety Information & Replacement Parts TABLE OF CONTENTS General Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . 2... -
Page 2: General Safety Information
• Whipping hoses can cause severe injury. Always check for dam- • Make sure there are no electrical cables, gas pipes etc. that could aged or loose hoses and fittings. cause a hazard if damaged by use of the tool. • Whenever universal twist couplings (claw couplings) are used, lock pins must be installed. 7.2.2.10 DUST AND FUME HAZARDS • Do not exceed the maximum air pressure stated on the tool. • Dust from some work processes can cause cancer, birth defects or • Use whip check safety cables to safeguard against possible hose to other respiratory diseases. Risk assessment of these hazards and tool and hose to hose connection failure. implementation of appropriate controls is essential. • Never carry an air tool by the hose. Universal Tool a Division of Florida-Pneumatic Manufacturing Corporation 851 Jupiter Park Lane, Jupiter FL 33458... -
Page 3: Air Compressor And Air Tool Safety
Safety Information (continued) AIR COMPRESSOR AND AIR TOOL SAFETY WARNING: Some dust created by power sanding, sawing, grinding, drilling and other construction activities contains 1. Risk of Bursting. Do not adjust the regulator to result in output chemicals known to cause cancer, birth defects or other pressure greater than the marked maximum pressure of this air reproductive harm. -
Page 4: Installation
□ Recommended lubricants: Air tool oil or any other high grade turbine oil containing moisture absorbent, rust inhibitors, metal wetting agents, and an EP (extreme pressure) additive. Universal Tool a Division of Florida-Pneumatic Manufacturing Corporation 851 Jupiter Park Lane, Jupiter FL 33458... -
Page 5: Operation
Operation Operating the screwdriver Changing the rotation direction □ This Screwdriver is designed to operate on 90 PSIG. □ The direction of the bit rotation is reversible. Lower pressure (below 90 PSIG) will reduce performance □ Control the rotation direction by moving the top-mounted of the tool. -
Page 6: Troubleshooting
Warranty Limited Warranty: Universal Tool warrants its tools to be free from defects in material and workmanship for one year from the date of Tool or its authorized service centers. If a UT tool proves defective in material or workmanship within one year after purchase, return it to any authorized service center or Universal Tool freight prepaid. -
Page 7: Service Parts
Service Parts / Exploded View Drawing FLORIDA-PNEUMATIC.COM Please contact 1-800-356-3392 for further assistance. - Page 8 Universal Tool ™ Questions, problems, missing parts? Call Customer Service 8 a.m.-5 p.m., EST, Monday-Friday 1-800-356-3392 FLORIDA-PNEUMATIC .COM Retain this manual for future use. Universal Tool a Division of Florida-Pneumatic Manufacturing Corporation 851 Jupiter Park Lane, Jupiter FL 33458...
Need help?
Do you have a question about the UT8963ATT-5 and is the answer not in the manual?
Questions and answers