Page 1: Table Of Contents
LCD Projector 8961WU/8963 8962WU/8960W User's Manual (concise) Thank you for purchasing this projector. Please read through this manual before using this product, in order to use safely and utilize well the product. WARNING product. After reading them, store them in a safe place for future reference.
Page 2: Entries And Graphical Symbols Explanation
First of all Entries and graphical symbols explanation The following entries and graphical symbols are used for the manuals and the product as follows, for safety purpose. Please know their meanings beforehand, and heed them. WARNING This entry warns of a risk of serious personal injury or even death. CAUTION This entry warns of a risk of personal injury or physical damage.
Page 3: Regulatory Notices
Regulatory notices About Electro-Magnetic Interference This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. This product may cause interference if used in residential areas. Such use must be avoided unless the user takes special measures to reduce electromagnetic emissions to prevent interference to the reception of radio and television broadcasts.
Page 4: About Waste Electrical And Electronic Equipment
Require of your dealer immediately if any items are missing. F-12 at the back of this manual. (1) Remote control with the two AA batteries (2) Power cord (x2) (3) Computer cable (4) Lens cover (8961WU/8962WU) (5) Lens cover (8960W/8963) Information Sheet (7) Security label (8) See Dukane website...
Page 5: Preparing For The Remote Control
Preparing for the remote control Please insert the batteries into the remote control before using it. If the remote control starts to malfunction, try to replace the batteries. If you will not use the remote control for long period, remove the batteries from the remote control and store them in a safe place.
Page 6: Arrangement
Arrangement Refer to tables T-1 to T-3 at the back of this manual as well as the following to determine the screen size and projection distance. The values shown in the table are calculated for a full size screen. Ⓗ × Ⓥ : Screen size ⓐ...
Page 7 Arrangement (continued) WARNING Install the projector where you can access the power outlet easily. Install the projector in a stable horizontal position. manufacturer. Read and keep the manuals of the accessories used. required. in the manual. Do not place the projector where any oils, such as cooking or machine oil, are used.
Page 8: Connecting With Your Devices
Connecting with your devices the required accessories, such as a cable in accord with the signal of the device. Consult your dealer when the required accessory did not come with the product or the accessory is damaged. After making sure that the projector and the devices are turned off, perform the gures F-1 to F-8 at back of this manual.
Page 9 Fastening the adapter cover prevention. USB wireless adapter: Temperature range: 0 ~ 45°C(operating) Loosen the screw on the bottom left of the WIRELESS port. Insert the tab of the cover into the hole at the upper right of the WIRELESS port in the direction of the arrow.
Page 10: Attaching The Terminal Cover
Attaching the terminal cover Terminal cover Hook Claw Insert the two claws of the Terminal cover into the hole of When detaching the Terminal cover, push the Hook in the direction of the arrow and pull it forward.
Page 11: Connecting Power Supply
Connecting power supply Put the connector of the power cord into the AC (AC inlet) of the projector. Power cord couple of seconds after the power supply connection, the POWER indicator will light up in steady orange. Please remember that when the DIRECT POWER ON function activated, the connection of the power supply make the projector turn on.
Page 12: Turning On The Power
Turning on the power projector and the outlet. STANDBY/ON button Make sure that the POWER indicator is lighted in steady orange. Then POWER indicator remove the lens cover. Press the STANDBY/ON button on the projector or the remote control. The projection lamp will light up and the POWER indicator will begin blinking in green.
Page 13: Adjusting The Projector's Elevator
Adjusting the projector’s elevator When the place to put the projector is slightly uneven to the left or right, use the elevator feet to place the projector horizontally. Using the feet can also tilt the projector in order to project at a 11°...
Page 14: Displaying The Picture
Displaying the picture VOLUME Activate your signal source. Turn the signal INPUT MYBUTTON VOLUME + / - ASPECT PbyP AUTO FREEZE source on, and make it send the signal to the MAGNIFY FOCUS ZOOM VOLUME buttons PAGE GEOMETRY PICTURE MUTE projector.
Page 15: Turning Off The Power
Turning off the power STANDBY/ON button Press the STANDBY/ON button on the projector or the remote control. POWER indicator The message “Power off?” will appear on the screen for about 5 seconds. Press the STANDBY/ON button again while the message appears. The projector lamp will go off, and the POWER indicator will begin blinking in INPUT...
Page 16: Replacing The Lamp
Replacing the lamp the pictures darker or the color tone poor. Note that each lamp has a different lifetime, and some may burst or burn out soon after you start using them. Preparation of a new lamp and early replacement are recommended. To prepare a new lamp, make contact with your dealer and tell the lamp type number.
Page 17 Replacing the lamp (continued) HIGH VOLTAGE HIGH TEMPERATURE HIGH PRESSURE WARNING The projector uses a high-pressure mercury glass lamp. The lamp can break with a loud bang, or burn out, if jolted or scratched, handled while hot, or worn over time. Note that each lamp has a different lifetime, and some may burst or burn out soon after you start using them.
Page 18 purchasing a new one. Type number : UX41161 Turn the projector off, and unplug the power down. Use a vacuum cleaner on and around the take it off. Press up slightly the bottom side knobs off. knobs of the projector and the outer side of the 4, 5 Use a vacuum cleaner for the inner side soiled, replace them with the new ones.
Page 19 the EASY MENU. (1) Press the MENU button to display a menu. cursor buttons, then press the cursor (or the ENTER / the RESET) button. A dialog will appear. WARNING projector. the projector. NOTE or turn off the projector, to prevent the internal heat level rising.
Page 20: Replacing The Internal Clock Battery
Replacing the internal clock battery Installing the battery is required in some cases. ( Event Scheduling in the User's Manual - Network Guide) A battery is not contained at the time of factory shipment. Please replace a battery according to the following procedure. Turn the projector off, and unplug the power cord.
Page 21: Using The Manuals
Using the manual See the Dukane web site “Downloads” for these models. There it provides the latest version manuals and links to the available software. DUKANE CORP AV SERVICE DEPT 2900 Dukane Drive St Charles, IL 60174 800-676-2487 / 630-762-4032 Fax 630-584-5156 avservice@dukane.com www.dukaneav.com...
Page 22 Liquid crystal projector 8963: 786,432 pixels (1024 horizontal x 768 vertical) 8960W: Liquid Crystal Panel 1,024,000 pixels (1280 horizontal x 800 vertical) 8961WU/8962WU: 2,304,000 pixels (1920 horizontal x 1200 vertical) Lamp 300W 16W x1 Speaker Power supply/ AC100V-120V: 4.4A, AC220V-240V: 2.2A...
Page 23 Note: The Dukane models described in this document are manufactured by Hitachi and use the same firmware, software programs, control code, and accessory parts. The equivalent Dukane to Hitachi models are; 8960W (CP-WX5505), 8961WU (CP-WU5500), 8962WU (CP-WU5505), and 8963 (CP-X5550).
Page 24: Troubleshooting - Warranty And After-Service
Troubleshooting - Warranty and after-service If an abnormal operation (such as smoke, strange odor or excessive sound) should occur, stop using the projector immediately. of User’s Manual - Operating Guide and Network Guide, and run through the suggested checks. If this does not resolve the problem, please consult your dealer or service company.
Page 25 Ⓗ x Ⓥ : Screen size ⓐ : Projection distance Projector top (from the front of the projector unit) Projector bottom 8963 (1024 x 768, ±10%) 4 : 3 16 : 10 16 : 9 Screen Screen Screen Projection distance Projection distance Projection distance size size...
Page 26 (inch) 10.1 11.1 12.3 12.6 13.9 14.7 15.1 10.3 16.7 8962WU/8961WU (1920 x 1200, ±10%) 16 : 10 16 : 9 4 : 3 Screen Screen Screen Projection distance Projection distance Projection distance size size size a min.
Page 27 8962WU/ 8960W Computer Smartphone Tablet 8961WU/8963 Computer Smartphone Tablet...
Page 28 8962WU/8960W Computer External device wireless adapter (optional) Access point 8961WU/8963 Computer External device wireless adapter (optional) Access point...
Page 29 8962WU/8960W VCR/DVD/ Blu-ray Disc player 8961WU/8963 VCR/DVD/ Blu-ray Disc player...
Page 30 8962WU/8960W Speakers Another Monitor projector (Wired) Remote control 8961WU/8963 Speakers Another Monitor projector (Wired) Remote control...
Page 31 8963...
Page 32 F-10 8960W...
Page 33 F-11 8961WU/8962WU...
Page 34 DOWN INTERACTIVE NETWORK BLANK MENU ENTER (12) OSD MSG RESET (13) (14) (15) (10) See Dukane Web site for manuals. DUKANE CORP AV SERVICE DEPT 2900 Dukane Drive St Charles, IL 60174 800-676-2487 / 630-762-4032 Fax 630-584-5156 avservice@dukane.com www.dukaneav.com 430-8960W-8961WU-8962WU-8963-Concise-00...

This manual is also suitable for:

8963 8962wu 8960w 8962wum

Ducane 8961WU User Manual

Quick Links

Need help?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Ducane 8961WU

Summary of Contents for Ducane 8961WU

This manual is also suitable for:

Table of Contents