Navigator Mouse & AC to DC Adapter & USB to DC Cable Install Hardware Note: - If you install a wired Navigator mouse, please skip the sections of "Install Receiver", "Select Mouse Channel" and "Link Mouse and Receiver". - If you install a wireless Navigator mouse, please skip the section "Install Wired Mouse".
Navigator Mouse 3) USB to PS/2 Version: Turn off the computer. Plug the adapter of the USB to PS/2 to the receiver USB connector and then connect to the computer. & Select Mouse Channel 1) The two-channel switch is located at the back of the mouse or inside the battery case.
Page 5
Navigator Mouse may automatically install the driver through selecting the PC auto- install function. 2) If the PC system does not set the auto_install function, please double click the file "Setup.exe" and follow the setup instructions to complete the driver installation. 3) Restart the computer .
Navigator Mouse "New", "Find", "Mail Link", "Mail Web Page", "My Favorites", "Refresh", "Save" and "Open". 2) Click the icon "X" in the middle of the menu to close the selection menu. Uninstall Driver Mouse Software can be removed from Windows by clicking the Add/Remove Programs icon in the Control Panel or clicking the "Uninstall"...
Navigator Mouse 18 European Countries: Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway , Portugal, Spain, Sweden, Switzerland and United Kingdom & Please do not change the frequency, features and functions of wireless mice from the original design. &...
Page 8
Navigator Mouse computer. 3) Ensure that mouse driver is installed into system. Question 2: The cursor on the screen remains at one spot or moves erratically. Solution: Check the mouse cable for any breaks or sharp twists. Examine the cable closely where it connects to the mouse. Question 3: The cursor movement stops at a corner and no longer responds to the mouse movement.
Page 9
Navigator Mouse being used on the System to prevent files from being renamed. Please shutdown any virus checking software running on the system and then run the setup again. Question 6: Detection problems of the mouse. Solution: If your mouse is connected to the mouse port and is not detected by the system, attempt the following step(s): 1) Please check the mouse port setting from the computer.
Page 10
Navigator Mouse Question 8: Too much interference to wireless mice. Solution: 1) Change the location of the receiver. 2) Please remain a certain distance from other high-voltage or wireless devices. Question 9: Problems of operating the wheel. Solution: 1) Verify that the "Browser Mouse" or "Mouse Control Panel" application is installed properly.
Page 11
Navigator Mouse Wireless Mouse Patents - Wireless Mouse and Stand Body: T aiwan 078386, China 01360042.7, Germany 401 06 575.8, and USA Pending - Improved Structure of Wireless Mouse System: T aiwan 89222812, China 01100419.3, Germany 201 12 178.6 and USA Pending - Wireless Mouse Recharge System: T aiwan 90104125, China 01109443.5, Germany 20112177.8, USA Pending...
Need help?
Do you have a question about the RMO231UP and is the answer not in the manual?
Questions and answers