Samsung CLP-320K User Manual page 23

FUNCTION
Printing the active Press this button and the green LED will start
window blinking. When the green LED stops blinking,
release the button.
Printing the whole Press this button and the green LED will start
monitor screen blinking. Release the button while it's blinking.
• The page will be printed on the default page like A4 or Letter.
• You can only use this function with a USB-connected machine.
• Print screen can only be used with Windows and Macintosh
operating systems.
• You can use this function only when the Smart Panel program is
installed.
Demo print button
(CLP-320N(K)/CLP-321N only)
It prints a demo page by pressing this button only. The printed page shows
the color print quality potential and overall print characteristics of the
machine.
Cancel button
By pressing the (Cancel button), you can do the following functions.
FUNCTION
Printing demo page In ready mode, press and hold this button for
about 2 seconds until the status LED blinks
slowly, and release (See "Printing a demo
page" on page 24).
Printing configuration In ready mode, press and hold this button for
sheets about 5 seconds until the status LED blinks
quickly, and release (See "Printing a machine
report" on page 69).
Canceling print job
Press
red LED blinks while the print job is cleared
from both the machine and the computer and
then the machine returns to ready mode. This
may take some time depending on the size of
the print job.
WPS button
(CLP-325W(K) only)
This feature automatically detects which WPS (Wi-Fi Protected Setup™)
mode your access point uses. By pushing a button on the wireless LAN
router / access point and the machine, you can setup the wireless network
and security settings See "Using a wireless network with WPS button on
the control panel" on page 36).
DESCRIPTION
DESCRIPTION
(cancel button) during printing. The
Power button
This button must be used to turn the machine on/off.
Turning on the machine
1. Plug in the power cord.
2. Press
If you want to turn the power off, press and hold this button for
about 3 seconds.
Introduction_ 23
(Power button) on the control panel.