Advertisement
Getting Started
1. Charging Battery
The Headset comes with a rechargeable battery included. The battery is not fully
charged when it is new. For first time use, it takes 3 hours to fully charge the battery.
Afterwards, it will take about 2.5 hours to fully charge the battery.
Plug the adapter into an AC outlet. The RED indicator on the headset will light on.(If the
headset is power ON state, the RED LED will flash alternative with BLUE LED)
When the battery is full, the RED indicator will turn off.
2. Turning the Headset On or Off
- To turn the Headset on
Turn the ON/OFF switch to ON position, then the blue indicator of the Headset
flashes. The Headset is now turned on.
- To turn the Headset off
Turn the ON/OFF switch to OFF position, and then the Headset will turn off.
3. Pairing the Headset
You are required to pair the Headset with your Bluetooth mobile phone/audio
device/PC/PDA before using the Headset.
Step 1 : Turn ON the headset. Hold and keep pressing the Pairing button for 6 seconds
until the blue and the red indicators are flashing alternatively. The headset is
now ready for pairing.
1
Advertisement
