DSPPA DSP9323 User Manual

Sip intercom system, door phone

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

SIP Intercom System

Door Phone

DSP9323

User Manual

Thank you for using our DSPPA public address system. Please read this User Manual carefully to make better use of this

equipment.

G u a n g z h o u D S P PA A u d i o C o . , L t d .

http://www.DSPPA.com

http://www.dsppatech.com

Table of Contents

Need help?

Do you have a question about the DSP9323 and is the answer not in the manual?

Questions and answers

Summary of Contents for DSPPA DSP9323

Page 1 DSP9323 User Manual Thank you for using our DSPPA public address system. Please read this User Manual carefully to make better use of this equipment. G u a n g z h o u D S P PA A u d i o C o . , L t d .
Page 2 SIP Intercom System Safety Notices 1. Please use the specified power adapter. If you need to use the power adapter provided by other manufacturers under special circumstances, please make sure that the voltage and current provided is in accordance with the requirements of this product, meanwhile, please use the safety certificated products, otherwise may cause fire or get an electric shock.
Page 3: Table Of Contents
SIP Intercom System Content PRODUCT INTRODUCTION ........................ 5 1. A ......................5 PPEARANCE OF THE PRODUCT 2. D ............................5 ESCRIPTION II. START USING ............................5 1. C ........................6 ONFIRM THE CONNECTION 1) Power, Electric Lock, Indoor switch port ..................6 2) Driving mode of electric-lock(Default in active mode) ..............
Page 4 SIP Intercom System e) Time/Date ............................34 EGS Cards ............................. 35 a) EGS Cards ............................. 35 b) EGS ACCESS ..........................36 EGS Logs ............................38 Function Key ..........................39 a) Function Key Settings ........................39 V. APPENDIX .............................. 41 1. T ........................
Page 5: Product Introduction
SIP Intercom System I. Product introduction DSP9323 door phone is a full digital network door phone, with its core part adopts mature VoIP solution (Broadcom chip), stable and reliable performance, hands-free adopting digital full-duplex mode, voice loud and clear, generous appearance, solid durable, easy for installation, comfortable keypad and low power consumption.
Page 6: Confirm The Connection
SIP Intercom System 1. Confirm the connection Confirm whether the equipment of the power cord, network cable, electric lock control line connection and the boot-up is normal. (Check the network state of light) 1) Power, Electric Lock, Indoor switch port Door phone the power supply ways: 12v/DC or POE.
Page 7: Quick Setting
SIP Intercom System √ √ √ √ √ √ √ √ √ 2. Quick Setting The product provides a complete function and parameter setting. Users may need to have the network and SIP protocol knowledge to understand the meaning represented by all parameters. In order to let equipment users enjoy the high quality of voice service and low cost advantage brought by the device immediately, here we list some basic but compulsory setting options in this section to let users know how to operate without understanding such complex SIP protocols.
Page 8: Basic Operation
SIP Intercom System "iDoorPhoneNetworkScanner.exe" software to find the IP address of the device.  Note: when power on, 30s waiting is needed for device running.  Log on to the WEB device configuration.  In a Line page configuration service account, user name, parameters that are required for server address register.
Page 9: Page Settings
SIP Intercom System 6) Private access code to open the door. Enable for local authentication, and set private access code. Input the access code directly under standby mode to open the door. In this way, the door log will record corresponding card number and user name.
Page 10: Configuration Via Web
SIP Intercom System  Default user with root level:  User name: admin  Password: admin 3. Configuration via WEB (1) System a) Information Information Field Name Explanation System Display equipment model, hardware version, software version, uptime, Last uptime and Information MEMinfo.
Page 11: B) Account
SIP Intercom System b) Account Through this page, user can add or remove users depends on their needs and can modify existing user permission. Account Field Name Explanation Change Web Authentication Password Can modify the login password to the account Add New User You can add new user User Accounts...
Page 12: C) Configurations
SIP Intercom System c) Configurations Configurations Field Name Explanation Export Save the equipment configuration to a txt or xml file. Please note to Right click on the choice and then choose “Save Link As.” Configurations Import Browse to the config file, and press Update to load it to the equipment. Configurations Reset to factory This will restore factory default and remove all configuration information.
Page 13: E) Auto Provision
SIP Intercom System e) Auto Provision Auto Provision Field Name Explanation Common Settings Show the current config file’s version. If the version of configuration downloaded Current is higher than this, the configuration will be upgraded. If the endpoints confirm the Configuration configuration by the Digest method, the configuration will not be upgraded unless Version...
Page 14: F) Tools
SIP Intercom System The equipment supports configuration from Option 43, Option 66, or a Custom Option Value DHCP option. It may also be disabled. Custom Option Custom option number. Must be from 128 to 254. Value SIP Plug and Play (PnP) If this is enabled, the equipment will send SIP SUBSCRIBE messages to a multicast address when it boots up.
Page 15 SIP Intercom System Syslog is a protocol used to record log messages using a client/server mechanism. The Syslog server receives the messages from clients, and classifies them based on priority and type. Then these messages will be written into a log by rules which the administrator has configured. There are 8 levels of debug information.
Page 16: Network
SIP Intercom System (2) Network a) Basic Field Name Explanation Network Status The current IP address of the equipment Subnet mask The current Subnet Mask Default gateway The current Gateway IP address The MAC address of the equipment Get the MAC address of time. Timestamp Settings Select the appropriate network mode.
Page 17 SIP Intercom System The equipment supports 802.1Q/P protocol and DiffServ configuration. VLAN function can support the different VLAN ID mode of processing in the WAN port and LAN port.  Chart 1 shows a network switch with no VLAN. Any broadcast frames will be transmitted to all other ports.
Page 18 SIP Intercom System Advanced Field Name Explanation Link Layer Discovery Protocol (LLDP) Settings Enable LLDP Enable or Disable Link Layer Discovery Protocol (LLDP) Enables the telephone to synchronize its VLAN data with the Network Enable Learning Switch. The telephone will automatically synchronize DSCP, 802.1p, and Function VLAN ID values even if these values differ from those provided by the LLDP server.
Page 19: C) Vpn
SIP Intercom System Enable 802.1X Enable or Disable 812.1X Username 802.1X user account Password 802.1X password HTTPS Certification File Upload or delete HTTPS Certification File c) VPN The device supports remote connection via VPN. It supports both Layer 2 Tunneling Protocol (L2TP) and OpenVPN protocol.
Page 20: Line
SIP Intercom System Field Name Explanation VPN IP Address Shows the current VPN IP address. VPN Mode Enable VPN Enable/Disable VPN. L2TP Select Layer 2 Tunneling Protocol Select OpenVPN Protocol. (Only one protocol may be activated. After the selection OpenVPN is made, the configuration should be saved and the phone be rebooted.) Layer 2 Tunneling Protocol (L2TP) L2TP Server...
Page 21 SIP Intercom System...
Page 22 SIP Intercom System Field Name Explanation Basic Settings (Choose the SIP line to configured) Display the current line status at page loading. To get the up to date line status, Line Status user has to refresh the page manually. Username Enter the username of the service account.
Page 23 SIP Intercom System Realm Enter the SIP domain if requested by the service provider Codecs Settings Set the priority and availability of the codecs by adding or remove them from the list. Advanced Settings Call Forward Enable unconditional call forward, all incoming calls will be forwarded to the Unconditional number specified in the next field Call Forward Number...
Page 24 SIP Intercom System Dial Without Set call out by proxy without registration Registered Click To Talk Set Click To Talk User Agent Set the user agent, the default is Model with Software Version. Use Quote in Display Whether to add quote in display name Name Ring Type Set the ring tone type for the line...
Page 25: B) Basic Settings
SIP Intercom System Set the line to enable call ending by session timer refreshment. The call session Enable Session Timer will be ended if there is not new session timer event update received after the timeout period Session Timeout Set the session timer timeout period Enable Rport Set the line to add rport in SIP headers Enable PRACK...
Page 26: Egs Setting
SIP Intercom System Basic Settings Field Name Explanation SIP Settings Local SIP Port Set the local SIP port used to send/receive SIP messages. Registration Failure Set the retry interval of SIP REGISTRATION when registration failed. Retry Interval STUN Settings Server Address STUN Server IP address STUN Server Port –...
Page 27 SIP Intercom System Features Field Name Explanation Common Settings DND might be disabled phone for all SIP lines, or line for SIP individually. But Enable DND the outgoing calls will not be affected Ban Outgoing If enabled, no outgoing calls can be made. Enable Intercom Mute If enabled, mutes incoming calls during an intercom call.
Page 28 Initial Value is “6789”. Device description displayed on IP scanning tool software. Initial Value is Description “DSP9323 IP Door Phone”. Enable Access Table: enter <Access Code> for opening door during calls. Enable Access Table Disable Access Table: enter <Remote Password> for opening door during calls.
Page 29: B) Audio
SIP Intercom System <Primary /Secondary>mode allow system to call primary extension first, if there were no answer, it would cancel the call and then call secondary Hot Key Dial Mode extension automatically. Select <Day/Night>mode allow system to check the calling time is belong to Day or Night time, and then decide to call the number 1 or number 2 automatically.
Page 30: C) Mcast
SIP Intercom System Audio Setting Field Name Explanation First Codec The first codec choice: G.711A/U, G.722, G.723.1, G.726-32, G.729AB Second Codec The second codec choice: G.711A/U, G.722, G.723.1, G.726-32, G.729AB, None Third Codec The third codec choice: G.711A/U, G.722, G.723.1, G.726-32, G.729AB, None Fourth Codec The forth codec choice: G.711A/U, G.722, G.723.1, G.726-32, G.729AB, None DTMF Payload...
Page 31 SIP Intercom System It is easy and convenient to use multicast function to send notice to each member of the multicast via setting the multicast key on the device and sending multicast RTP stream to pre-configured multicast address. By configuring monitoring multicast address on the device, monitor and play the RTP stream which sent by the multicast address.
Page 32 SIP Intercom System  Web Settings: The multicast SS priority is higher than that of EE, which is the highest priority. Note: when pressing the multicast key for multicast session, both multicast sender and receiver will beep. Listener configuration  Blue part (name) "Group 1","Group 2"...
Page 33: D) Action Url
SIP Intercom System  when you set the Priority to a value, only higher than the priority of multicast can come in, if you set the Priority is 3, group 2 and group 3 for priority level equal to 3 and less than 3 were rejected, 1 priority is 2 higher than ordinary call priority device can answer the multicast message at the same time, keep the hold the other call.
Page 34: E) Time/Date
SIP Intercom System server. Sample format is http://InternalServer /FileName.xml e) Time/Date Time/Date Field Name Explanation Network Time Server Settings Time Synchronized Enable time-sync through SNTP protocol via SNTP Time Synchronized Enable time-sync through DHCP protocol via DHCP Primary Time Server Set primary time server address Secondary Time Set secondary time server address, when primary server is not reachable, the device will try...
Page 35: Egs Cards
SIP Intercom System Resync Period Time of re-synchronization with time server Date Format 12-hour clock Set the time display in 12-hour mode Date Format Select the time/date display format Daylight Saving Time Settings Location Select the user's time zone specific area DST Set Type Select automatic DST according to the preset rules of DST, or the manually input rules Offset...
Page 36: B) Egs Access
SIP Intercom System Save Door Card computer. Table Name The name of has been issuer cards. The card number of has been issuer cards. (Note: The card is not registered in the remote access list is unable to open the door.) Issuing Date The issuing date of has been issuer cards.
Page 37 SIP Intercom System Field Name Explanation Import Access Table Click the <Browse> to choose to import remote access list file (access List.csv) and then click <Update> can be batch import remote access rule. Access Table According to entrance guard access rules have been added, can choose single or multiple rules on this list to delete operation.
Page 38: Egs Logs
SIP Intercom System Guest: the door phone would be ringing for incoming call, if the auto answer had been disabled. Valid for user access rules (including RFID, access code, etc) within corresponding time Profile section. If NONE is selected, it would be taken effect all day. Virtual extension number, used to make position call instead of real number.
Page 39: Function Key
SIP Intercom System Card). Note: there are three kinds of credit card feedback results. 1. Temporary Card (Only add the card number, without adding other rules ) 2. Valid Card (Has been added access rules) 3. Illegal Card (Did not add information) (7) Function Key a) Function Key Settings ...
Page 40 SIP Intercom System Enter the phone number in the input box, when you press the shortcut key, equipment will dial set telephone number. This button can also be used to set the IP address, press the shortcut key IP direct dial call.
Page 41: Appendix
SIP Intercom System  operation mechanism Device through the DSS Key configuration of multicast address and port and started coding; set by WEB to monitor the multicast address and port; device sends a multicast, listens to the address of the device can receive the multicast content.
Page 42: Basic Functions
SIP Intercom System Working humidity 10% - 90% Storage temperature -40° C to 70° C Installation way Wall mounted External size 160 x 93 x 35mm Package size 178 x 104 x 55mm 420g Gross weight 2. Basic functions  2 SIP Lines ...
Page 43: Other Instructions
SIP Intercom System VI. Other instructions 1. Open door modes  Local control 1) Local Password  Set <Local Password> (the password is "6789" by default) via DOOR PHONE\DOOR PHONE as above.  Input password via keypad and press the "#" key, then the door will be unlocked. 2) Private access code ...
Page 44: Management Of Card
SIP Intercom System Management of card Administrator Table <Issuer> and <Revocation>  Add Administrator cards Input a card’s ID, selected <Issuer> or <Revocation> in the types and Clicked <Add>, you can add administrator card.  Delete Administrator cards Select the admin card of need to delete, click <Delete>. 2) Add user cards ...
Page 45 SIP Intercom System  Use new card to touch card reader induction area, and then you might hear the confirmed indication tone from the device. Repeat step can to add more cards.  In web page < EGS Setting →Features →Card Reader Working Mode > option, select <Normal>. ...
Page 46 SIP Intercom System  In web page < EGS Setting →Features →Card Reader Working Mode > option, select <Card Revoking>.  Click <Apply>, Card Reader would be entered the revoking status.  Use card to touch card reader induction area, and you might hear the card reader confirmed indication tone.
Page 47 SIP Intercom System Guangzhou DSPPA Audio Co., Ltd...