Using Your Toaster; Operating Instruction; Toast; Bagel - Sears Kenmore TOAST N WAVE MD-0942KT Use And Care Manual

Hide thumbs

Table Of Contents

Table of Contents

OPERATING INSTRUCTION

• When using your toaster for the first time, wipe toaster body with a damp cloth. Make sure the crumb tray is

pushed all the way in place before plugging toaster into wall outlet. Thick breads may require longer settings or

even two heating cycles to achieve desired results.

• Remove all protective wrappings from food before placing into toasting slots. Place bread into slots and Close

the door. Then select one mode(Toast/Bagel) and press the Darkness Control to the desired setting(experiment

to suit individual taste). When you pressing the Start button, heating element will

switch on.

• Centering guides will automatically center the food for even browning. However,

uneven browning may occur if you are only using one toasting slot.

• Do not adjust the Darkness Control while the toaster is in use. To interrupt the

toasting cycle, press the "stop/clear" control button.

• During the toasting cycle, the indicator light wil be illuminated. If you open the door,

toasting will stop and the light will blink. The toasting cycle can be resumed by

closing the toaster door and pressing the start button.

• When the beep sounds, take out food carefully. Be careful hot surface.

Toast

This toaster automatically determines required cooking times for toasting.

Example: To toast for 8 step.

Touch:

3 times

Bagel

Use this function to cook bagel.

Example: To bagel for 7 step.

Touch:

2 times