Operation Manual / A200-L
9 Disassembly and assembly / 9.21 Fitting the filter silencer
9.21.3
Fitting the filter silencer (cast)
Fig. 63: Fitting the filter silencer
Product
A265-L
A270-L
A275-L
A280-L
Table 44: Tightening torque (72004)
1. Attach the lifting gear to the front lug and rear eyelet of the filter silencer (81000).
2. Position filter silencer on compressor casing.
3. Fit nuts (72004) with washers (72003) and tighten.
Fit insulation as far as necessary.
u
© Copyright 2021 ABB. All rights reserved.
Size
Tightening torque [Nm]
M14
M16
M18
M20
HZTL4036_EN
130
200
300
420
Rev.T
December 2021