User Keypad And Whirlpool Modes/Features - Kohler K-856-M Homeowner's Manual

Flexjet Flow Mode
Activates Mode Selected
Backjet Mode -
Adjust Pulse
Rotate outer
ring to access
desired mode
Power On/Off
Chromatherapy -
Specific Color

User Keypad and Whirlpool Modes/Features

Power - Turns the whirlpool pump on and off. Symbols illuminated in blue indicate available
modes/features. Modes which are operating will be illuminated in green.
Outer Ring - Rotate the outer ring to the desired mode. The selected mode will flash (blue).
Activate Button - Press "OK" to activate the desired mode.
Up Arrow - Increases the water flow when the Flexjet mode is active. Increases the pulse speed
when the neckjet or backjet mode is active.
Down Arrow - Decreases the water flow when the Flexjet mode is active. Decreases the pulse speed
when the neckjet or backjet mode is active.
Flexjet Mode - When illuminated, this mode allows you to adjust the water flow by pressing the up
or down arrows.
Neckjet Mode - When illuminated, the neckjets are operating and you may adjust the pulsing speed
by pressing the up or down arrows.
Backjet Mode - When illuminated, the backjets are operating and you may adjust the pulsing speed
by pressing the up or down arrows.
Heater - The heater automatically engages when the whirlpool is turned on. To turn the heater off,
rotate the outer ring until the heater mode is flashing and press "OK." Press "OK" again to turn the
heater back on. The heater will help to maintain the water temperature up to 104°F (40°C).
Indicator Bar - Shows the water flow volume in the Flexjet mode. Shows the pulse speed in the
neckjet or backjet mode.
Effervescence Mode - Effervescence ports activate to provide a gentle, soothing bubbling action. The
Flexjet mode, backjets and neckjets will automatically turn off when the effervescence mode is
activated.
Chromatherapy Cycle - Chromatherapy lights will automatically and continuously cycle through
the eight colors: white, violet, indigo blue, aqua blue, green, yellow, orange, and red. One cycle
through all eight colors takes approximately one minute.
Chromatherapy Specific Color Selection - When this mode is selected, you may choose a specific
color for the bath.
1023274-5-B
Heater
Lighted User Keypad
Neckjet Mode - Adjust Pulse
Increases Flow or Pulse
Indicator Bar - Shows
water flow volume or
pulse speed
Effervescence Mode
Decreases Flow
Chromatherapy Cycle
4
NOTE: Keypad shows all
features available. Your
keypad may vary based
on your whirlpool model.
Kohler Co.