Kohler K-1114 K-1114 Roughing-In Manual page 2

21"
(53.3 cm)
3-3/4"
(9.5 cm)
1-1/4"
(3.2 cm)
3-1/2"
(8.9 cm)
Product Information
Applicable product:
Integral apron, left drain
Integral apron, right drain
Fixture*: basin area
Bathing well 55" (139.7 cm) x
23-1/4" (59.1
cm)
water depth
To overflow 15" (38.1 cm)
* Approximate measurements for comparison only.
Pump: Hp
1-speed 1.25
1047191-1-B
11-1/16" (28.1 cm)
72" (182.9 cm)
3/8" (1 cm)
2-7/8" (7.3 cm)
3" (7.6 cm)
K-1114-LA shown
K-1114-RA not shown
top area
64" (162.6 cm) x
32" (81.3 cm)
capacity
78.5 gal (297 L)
V Hz
120 60
No change in measurements if connected with
drain illustrated. (K-11677 or K-11677M)
1-1/4" (3.2 cm)
21" (53.3 cm)
Required Electrical Service
Dedicated circuit required, protected with a Class A
Ground-Fault Circuit-Interrupter (GFCI):
Pump/control
Locate the outlet behind the whirlpool and within 24" (61 cm)
of the pump.
weight
Notes
149 lbs
(68 kg)
Install this product according to the installation guide.
Floor support under whirlpool must provide for a minimum of 80
lbs./square foot (390 kg/square meter) loading.
If installing a rim-mount faucet, make sure there is no interference
with the drain overflow and circulating system before drilling any
holes. Consult local and national codes for minimum air gap
A
requirements if installing a spout on the faucet deck.
7.5
This fixture conforms to ANSI Standard Z124.1. All dimensions are
nominal.
2
Recommended faucet area
1-1/4"
(3.2 cm)
Tile Flange
Detail
42" (106.7 cm)
1-1/2" OD
120 V, 15 A, 60 Hz
Kohler Co.