Table of Contents
Advertisement
3-6
Installing the Hard Disk Drive
Read the following guidelines before you begin to install the Hard disk drive:
• Take note of the drive tray orientation before sliding it out.
• The tray will not fit back into the bay if inserted incorrectly.
• Make sure that the HDD is connected to the HDD connector on the backplane.
Follow these instructions to install a 3.5" hard disk drive:
1.
Press down the colored release button.
2.
Pull out the black locking lever.
3.
Use the black locking lever to slide out the HDD tray.
4.
Pull apart the HDD tray.
5.
Slide hard disk into the tray.
6.
Push together to secure the hard drive.
3
4
6
- 33 -
Press
Pull
2
5
1
System Hardware Installation
Advertisement
Table of Contents
