D-Link DWL-G650M Manual page 18

DWL-G650M User's Manual
Site Survey - Profile Configuration
When you click Add, Properties or Connect in the Site Survey or Encryption screen,
this popup screen appears for configuration purposes.
Profile Name:
Wireless Mode:
Power Mode:
D-Link Systems, Inc.
Enter a name for the network profile here.
The Service Set Identifier is the name assigned to the wireless
SSID:
network. The factory SSID setting is default.
Either Infrastructure or Ad-Hoc will be displayed here. (Please
see the Getting Started section in this manual for an explanation of
these two modes.)
Channel: The channel selection is automatically determined by the
DWL-G650M.
Tx Rate:
The default setting is Auto. These settings are automatically
determined for the maximum wireless signal rate.
Continuous Access Mode is the default setting. For best results leave
this setting at the default.
Using the Configuration Utility
18