Fibre Glast 134 Usage Instructions

134
1 Liter High-Pressure Spray Gun
Information present herein has been compiled from sources considered to be dependable and is accurate and reliable to the best of our knowledge and belief but is not guaranteed to be so. Nothing
herein is to be construed as recommending any practice or any product violation of any patent or in violation of any law or regulation. It is the user's responsibility to determine for himself the suitability
of any material for a specific purpose and to adopt such safety precautions as may be necessary. We make no warranty as to the results to be obtained in using any material and, since conditions of use
are not under our control, we must necessarily disclaim all liability with respect to the use of any material supplied by us.
© Copyright 2020 Fibre Glast Developments Corporation
Usage Instructions & Parts List
Operating Instructions & Suggestions
This is a high pressure gun offering a range of adjustments that will allow the
spray pattern to be customized to the specific project. This gun excels at large
surface spraying, such as new mold construction, composite refinishing and
large boat repair.
This gun comes fitted with a 3.0mm nozzle, which is ideal for any of our gel
coats. Ships complete with 1 Liter Aluminum cup, cleaning brush, and multitool.
Read this Instruction Manual carefully. Basic precautions should be strictly
followed to prevent the damage to the tool and injury to the operator. Retain this
manual for further reference.
Fibre Glast Developments Corporation
385 Carr Drive
Brookville, Ohio 45309
Phone: 800.214.8572
Fax: 937.833.6555
www.fibreglast.com