Connection - Telefunken TF-DVBT230 Instruction Manual

Connection

Connection
Antenna input
• Connect an external DVB-T/T2 antenna
(cable) connector to the antenna input RF IN.
The signal in the block cable antenna
can fail to contain DVB-T/T2 signal due to the
carrier frequency altered by the cable network
operator.
In order to receive digital air TV signal
use an indoor or outdoor UHF antenna. Specify
the possibility and quality of digital air signal
with your local digital TV service providers. The
absence of a stable TV signal in your area can-
not be a reason for returns or refunds without
an additional test of TV signal reception in your
area.
To increase the reception quality of
the state digital air television in rural areas or
at significant distances from a broadcasting
center we recomment using individual active
outdoor UHF antennae with a high resistance
factor, and placing them at maximum possible
heights.
Power adaptor input
• Connect the DC power adaptor to this
input and plug it into the electrical outlet.
HDMI-out
• If your TV has an HDMI video input,
connect it to an HDMI output of this unit using
an HDMI cable (included).
AV output
• Connect the mini AV jack to the
composite video input and left/right stereo
audio inputs on your TV using a mini AV
cable.
4