Quick call
Quick call
To access the
mode. It allows you to set your four most frequently
dialled numbers. You can then quickly call one of
them by selecting the corresponding icon or picture
on the screen.
This feature is also available from the main menu, in
Settings > Shortcuts > Quick call.
Setting a Quick call contact
1. In idle mode, press + to access the
screen. Select a thumbnail to configure and press
, or L Set.
2. Select a name in the contacts list, and press ,
again to access the
picture. Proceed the same way for each
thumbnail.
Calling a Quick call contact
To make a call, press + when in idle mode, then select
the thumbnail of your choice and press ,.
To reconfigure a thumbnail, select it and press , to
Replace
the name and/or picture.
10
feature, press + when in idle
Quick call
Picture album
and select a
If a picture is already associated with a contact, it is
Quick call
displayed in the
in one of the menus will also update it in the other.
Handling multiple calls
The ability to handle two or more calls at one time
and to make conference calls is dependent on your
operator and/or subscription.
Making a second call
You can make a second call during an active call or
with a call on hold. While on the phone, dial a
number (or select a contact in the phonebook) and
press ,. The first call is put on hold (the number is
displayed on the bottom of the screen) and the second
number is dialled. You can then press , to access the
options among which are:
Switch calls
•
to toggle between calls (you can also
press < or > to switch calls).
Transfer
•
to connect the two calls. You are
disconnected when the transfer is completed.
Conference
•
to introduce the caller into a conference call.
screen. Changing the picture
Calling