LG LW30 Series Installation Manual page 15

8 Power On Default
Set the input source or channel to display and. A/V settings when turn on power in AC Power On or
Stand-by status.
- Input Source
Set whether it is turned on by the set input source or by the last stored input source.
y It is turned on by the Last Memory Input if the Input source is turned off.
y
y It is turned on by the Last Pr. If the Input source is turned off and the last memory Input is the
y
RF.
y The available Input Source values should be rotated.
y
y If both the Input source and the 'On Time' menu are set, the Input source takes the priority.
y
y When the Input source is changed to the TV, Programme menu is available.
y
y When the Input source is changed to the ATV, the Program No. is set to 0. (If the channel map
y
structure does not support this, it depends on model's channel handling.
y Access to an input source item and a channel in 'On Timer' menu must be disabled when
y
Power On Default is activated.
- Programme
Select start channel number if Input source's value is TV. (in case of ATV, it means physical
channel number.)
- A/V Setting
If 'A/V Setting' is changed from 'No' to 'Yes', parameters that are set before entering 'Installation
Menu' are applied whenever turn on power.
y Following Parameters are applied to basic.
y
» Picture section - PSM mode, Picture Data (Contrast, Brightness, Color, Sharpness, Tint)
» Sound section - SSM mode, Sound Data (Balance, Equalizer Data)
» AVL (Auto Volume Level) and Language, Teletext language, ARC Data. Except these, other
parameters are applied differently according to the TV-Set.
- Aspect Ratio
The aspect ratio determines the default aspect ratio that the set returns to on power up.
y The modes are as follows:
y
» Aspect ratio = "Disable(0)" stays at previous state, same as consumer model.
» Aspect ratio = "Original(1)"
» Aspect ratio = "4:3 ratio (2)"
» Aspect ratio = "16:9 ratio (3)"
y If enabled, upon power up the television reset the aspect ratio to the specified state regardless
y
of how the user has previously changed the aspect ratio.
(If "original" is not supported, the television set the aspect ratio to "16:9".)
9 Aux Source Setting
The Auxiliary (Input) Source Setting feature will enable or disable for each external input. When 'Aux
Source Setting' is set to Yes(Work), the RJP or HDMI-CEC / HTNG will not operate.
- Input Source
y Available Input Source List
y
- Setting
y Decide whether selected 'Input Source' is usable (Enable) or not (Disable).
y
y User cannot disable the current input's 'Aux Source Setting'.
y
10 Radio Name Display
Instead of 'Audio Only', the name of a radio channel is displayed on the screen when a radio broadcast
is playing.
y Set to Yes(Work) or No(Do Not Work).
y
y If the setting is 'Yes', the name of a radio channel is displayed for the radio channel.
y
INSTALLATION MENU
15