LG T2310VSAW Owner's Manual page 37

Symptoms Reason
UE rebalancing operation is
not successful.
The load is too small.
Heavy articles are mixed with
lighter items.
The load is out of balance.
Control error.
Water level is too high due to
a faulty water valve.
The water level sensor is not
working correctly.
A motor error has occurred.
Clutch error.
Tub clean Alarm.
Sensor for cloth-sensing is
defective.
Motor's revolution is too low. • Unplug the washing machine
Contact-point of Connector is
defective.
CL is not an error. This
prevents children from
changing cycles or operating
the appliance.
Solution
• The automatic attempt to
rebalance the load was not
successful. The cycle has
been paused to allow the load
to be manually adjusted.
• Add more items to allow the
washing machine to balance
the loads.
• Wash articles of somewhat
similar weight.
• Manually redistribute the load
if articles have become
tangled.
• Unplug the washing machine
and wait 60 seconds.
Reconnect power and try
again. If the error code is not
released, call for service.
• Close the water taps, unplug
the washing machine, and call
for service.
• Close the water taps, unplug
the washing machine, and call
for service.
• Allow the washing machine to
stand for 30 minutes and then
restart the cycle. If the error
code is not released, call for
service.
• Unplug the washing machine
and call for service.
• Run the Tub Clean
programme.
• Manually redistribute the load
if articles have become
tangled.
and wait 60 seconds.
Reconnect power and try
again.
• Call for service.
EN
37