Table of Contents
Advertisement
106
OPTION 2 Settings
1
Press the SETTINGS button.
2
Use the
,
OK button.
3
Use the
,
the OK button.
– To return to the previous menu, press the
4
Press the EXIT button when completed.
The available option 2 settings are described as follows.
Item
Keystone
Auto
Keystone
PJT Mode
,
or
button to select OPTION 2 and press the
,
or
button to set up the desired item and press
To prevent the screen image from becoming trapezoidal,
Keystone adjusts the top and bottom width of the image if
the projector is not set at a right angle to the screen.
Auto Keystone provides a rectangular screen image by
automatically adjusting the Keystone number when there
is a trapezoidal screen image caused by tilting of the
projector.
Automatically adjusts the Keystone
On
number.
Off
Manually adjusts the Keystone number.
This function turns the projected image upside down or
flips horizontal.
•
Select Rear when projecting from the back of the
transparent screen purchased separately.
•
Select Front Ceiling when installing the product on the
ceiling.
•
When PJT Mode is Rear/ Front Ceiling, the left/right
of the speaker changes automatically.
button.
Description
Item
Advertisement
Table of Contents
