Charge The Battery - Philips CT0193BLK/00 Manual

Philips mobile phone ct0193blk 193
Hide thumbs Also See for CT0193BLK/00:
Table of Contents

Advertisement

Charge the battery

Your phone is powered by a rechargeable battery.
A new battery is partially charged and an alarm will
warn you when the battery level is low. If the
battery is empty, it needs to be charged for 2 or 3
minutes before the battery symbol indicators flash.
Plug the charger into the charger connector at the
top left side of the phone as shown below. Then
plug the other end of the charger into an AC power
socket.
The battery symbol indicates the state of charge.
The charge indicators will scroll when the battery
is charging. The battery is fully charged when the
charge indicators stop scrolling. You can then
disconnect the charger.
6
Keeping the charger plugged to the mobile phone
when the battery is fully charged will not damage
the battery. The only way to disconnect the
charger is to unplug it, so use an easily accessible
AC power socket. If you would not use your phone
for a period of time, we recommend that you
remove the battery.
You can use your phone while it is charging.
When the battery is completely discharged, the
charge indicators will appear only after a few
minutes of charging.
Getting Started

Advertisement

Table of Contents
loading

Table of Contents