Advertisement
What's in the box
Base station with bracket
for your new basic phone
OR
Handset
your new answering
machine phone
2 AAA rechargeable
Power supply
NiMH batteries
User manual
Warranty card
*You may find in the box the line adaptor delivered separately from the line cable. In this
case, you have to connect the line adaptor to the line cord first before plugging the line
cord to the line socket.
In multihandset packs, you will find one or more additional handsets, chargers with power
supply units and additional rechargeable batteries.
WARNING
Always use the cables and batteries that came with your phone.
Connect
1
Connect the base station
1. Place the base station in a central location near the telephone line socket and electricity socket.
Battery door
2. Connect the line cord and the power cable to their corresponding connectors at the
back of the base station.
3. Connect the other end of the line cord and power cable to their respective sockets.
Install
2
Insert rechargeable batteries and charge
Line cord*
Insert batteries
Quick Start Guide
Configure your phone (if necessary)
After charging your phone for a few minutes, a Welcome screen may appear depending on
the country where you live. If the Welcome screen appears:
<
OK
1. Press
:
2. Scroll
to find your country.
<
OK
3. Press
Your phone is now ready for use.
Charge handset for 24 hours
to display a list of countries.
to confirm your selection.
Enjoy
3
Make a call
r
Dial the number (maximum 24 digits) and press
key.
OR
r
Press
key to take the line and dial the number (maximum 24 digits).
Answer a call
r
When the phone rings, press
key.
End a call
e
To end a conversation, press
key.
Adjust earpiece volume
:
During a call, press
to select from
VOLUME 1
,
VOLUME 2
Set the ring melody
m
:
1. Press
key in idle mode, scroll
to
PERSONAL SET
:
<
scroll
to
HANDSET TONE
and press
OK
, scroll
<
OK
and press
.
:
2. Scroll
to your desired melody to play the melody.
<
OK
3. Press
to set the ring melody.
A validation tone is emitted and the screen returns to previous menu.
Store a contact in the phonebook
m
:
PHONEBOOK
1. Press
key in idle mode, scroll
to
<
OK
NEW ENTRY
to enter
.
ENTER NAME
2.
is displayed on the screen.
3. Enter the name of the contact (maximum 12 characters) and press
<
OK
4. Enter the number (maximum 24 digits) and press
A validation tone is emitted.
Access the phonebook
d
:
1. Press
in idle mode and scroll
to browse the phonebook.
<
OK
2. To view the details, press
.
or
VOLUME 3
.
<
and press
OK
,
:
to
RING TONES
<
OK
and press
, press
<
OK
.
.
Advertisement
