Philips CD5650B/22 Quick Start Manual page 2

What's in the box
R
Charger
Handset
User manual Guarantee
Note
• In some countries, you have to connect the line adaptor to the line cord, then
plug the line cord to the line socket.
• In multi-handset packs, there are additional handsets and chargers with power
supply units.
Caution
• Use only the supplied batteries and adaptor
1
Power supply
1 The batteries are pre-installed in the handset. Pull the battery tape off from
the battery door before charging.
2 Place the handset on the charging cradle to power up.
Configure your phone (if necessary)
Set the date and time.
»
Quick Start Guide
Install
Install the handset
R
The phone is now ready to use.
2
Enjoy
Make a call
1 Press and dial the phone number; or
2 Dial the phone number and Press to dial out the call.
Answer a call
When the phone rings. Press or to answer the call.
End a call
Press .
Adjust the earpiece volume
Press or to adjust the volume during a call.
Set the handset's ringtone
1 Press menu.
2 Select [PERSONAL SET] > [HANDSET TONES] > [RING
TONES], then press [SELECT] to confirm.
Select a ringtone, then press [SELECT] to confirm.
3
The setting is saved.
»
Add a record
1 Press menu.
2 Select [PHONEBOOK] > [NEW ENTRY], then press
[SELECT] to confirm.
Enter the name then press [OK] to confirm.
3
4 Enter the number, then press [SAVE] to confirm.