Table of Contents
Advertisement
Quick Links
PAINT SPRAY GUN WASHER
ASSEMBLY AND OPERATING INSTRUCTIONS
Visit our website at: http://www.harborfreight.com
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Copyright
2006 by Harbor Freight Tools
©
contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight
Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual
product may differ slightly from the product described herein. Tools required for assembly and service may not
be included.
For technical questions or replacement parts, please call 1-800-444-3353.
Revised Manual 11h
94996
. All rights reserved. No portion of this manual or any artwork
®
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Central Pneumatic 94996
- Page 1 Tools required for assembly and service may not be included. For technical questions or replacement parts, please call 1-800-444-3353. Revised Manual 11h 94996 . All rights reserved. No portion of this manual or any artwork ®...
-
Page 2: Specifications
The handles must be kept clean, dry, and free from oil and grease at all times. Disconnect air supply. Unplug tool from air supply when not in use. SKU 94996 For technical questions, please call 1-800-444-3353 Specifications 2.5 gallons... - Page 3 It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator. SKU 94996 For technical questions, please call 1-800-444-3353 WARNING! FIRE HAZARD!
-
Page 4: Operation
Add 2.5 gallons of organic, nonflammable cleaning fluid into the Tank. Push in and use the Trigger Hook to lock the Spray Gun Trigger in the open position. See diagram next page. SKU 94996 For technical questions, please call 1-800-444-3353 Unpacking... - Page 5 Turn on the Output Hose Switch. See photo at the top of page 6. Turn off the Waste Hose Switch. Lower the Tank Lid to the closed position. See photo next page. SKU 94996 For technical questions, please call 1-800-444-3353 REV 07j...
- Page 6 Turn off the Air Inlet Switch (upper right side of Tank). See photo below. Turn off Output Hose Switch. Open Tank Lid and remove clean Spray Gun and Cup. When finished with the Washer, disconnect from the air supply. SKU 94996 For technical questions, please call 1-800-444-3353 REV 07g, 07j, 08d Page 6...
-
Page 7: Troubleshooting
BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. SKU 94996 For technical questions, please call 1-800-444-3353 Troubleshooting Possible Cause 1. -
Page 8: Parts List
Spring 17-7 Rear Cap 17-8 Screw 17-9 Button Switch 17-10 O-Ring 17-11 Air Connector 17-13 O-Ring Air Inlet Switch SKU 94996 For technical questions, please call 1-800-444-3353 Parts List Description Timer Screw 21-1 Up Bridle 21-2 Down Bridle 21-4 21-5... -
Page 9: Assembly Drawing
Assembly Drawing REV 07j; 09j Page 9 SKU 94996 For technical questions, please call 1-800-444-3353... - Page 10 This warranty gives you specific legal rights and you may also have other rights which vary from state to state. 3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • (800) 444-3353 REV 11h Page 10 SKU 94996 For technical questions, please call 1-800-444-3353...
Need help?
Do you have a question about the 94996 and is the answer not in the manual?
Questions and answers