Advertisement
Quick Links
CONVENTIONAL AIR CAP AND FLUID NOZZLE CHART
MODEL
PRESS /
AIR CAP
NO.
SIPHON
21-2166
21-2266
21-2266T
Siphon
21-2366
21-2466
21-2467
21-2268
21-2163
A100C
21-2263
21-2266-3
21-2266-3T
Pressure
21-2167
21-2267
21-2168
21-2766B
21-200**
Internal Mix
21-2201**
Actual fluid nozzle and air cap combinations are determined by application (see application chart page 4)
*Gun inlet pressures may vary as required by application
**200 Air cap requires P/N 21-1583 base & 21-1584 ring
Coating Atomization Technologies 337 South Arthur Avenue, Louisville CO 80027 Phone: 888.820.4498, Fax: 303.438.5708
FAN
FLUID TIP
CONTROL
RANGE
ORIFICE
0.6 - 1.8
0.6 - 1.8
0.6 - 1.8
0.6 - 1.8
0.6 - 1.8
2.2
2.8
0.6 - 1.8
None
0.6 - 1.8
0.6 - 1.8
0.6 - 1.8
2.2
2.2
2.8
1.0 - 1.8
1.5 - 1.8
2.2
www.spraycat.com
A A A A A ut
ut
ut
ut oC
oC
oC
oC A A A A A T 1
ut
oC
AIR CAP
SCFM
RING
5
12
12
31-0606 0.6mm (.022")
12
31-0607 0.7mm (.028")
15
31-0610 1.0mm (.040")
15
31-0612 1.2mm (.046")
15
31-0613 1.3mm (.052")
8
31-0615 1.5mm (.059")
Included
14
31-0618 1.8mm (.070")
16.2
31-0622 2.2mm (.086")
16.2
31-0628 2.8mm (.110")
14.5
15
14
31-0618V 1.8mm (.070")
8
31-0622V 2.2mm (.086")
5.2
31-0628V 2.8mm (.110")
5.2
T 1
T 1 00C
T 1
00C
00C
00C
T 1
00C
AUTOMATIC SPRAY GUN
PRODUCT INFORMATION
AVAILABLE FLUID
NOZZLES
marking on needle
17-4PH STAINLESS
300 STAINLESS
CARBIDE
NEEDLES /
40-A107 (107)
40-A110 (110)
40-A115 (115)
40-A122 (122)
40-A128 (128)
CARBIDE
40-A6201
40-A6201
40-A6201
Advertisement
Related Manuals for C.A. Technologies AutoCAT 100C
Summary of Contents for C.A. Technologies AutoCAT 100C
- Page 1 A A A A A ut ut oC oC A A A A A T 1 T 1 00C AUTOMATIC SPRAY GUN PRODUCT INFORMATION CONVENTIONAL AIR CAP AND FLUID NOZZLE CHART MODEL PRESS / FLUID TIP AIR CAP AVAILABLE FLUID NEEDLES / AIR CAP CONTROL...
- Page 2 A100C A100C A100C A100C A100C Operation and Maintenance Instructions for Spray Guns Gun Mounting A 1/2” dia. x 5” lg. rod is provided for mounting. The gun can be mounted from the left or right side or from the bottom. Thread the mounting rod (9) into one of the three holes that best suit the mounting location for the application.
- Page 3 ITEM NO. PART NO. DESCRIPTION ITEM NO. PART NO. DESCRIPTION See Air Cap Chart Air Cap** 98-7006 O-Ring (Viton) 2 Required* See Air Cap Chart Fluid Tip** 60-603 Air Control Spool 31-2201 Fluid Nozzle Body 98-7014 O-Ring (Viton) 2 Required* 61-1005 Seal* 98-7027...
- Page 4 FLUID NOZZLE / AIR CAP SELECTION CHARTS AUTOCAT Series 100C - Pressure / Siphon Feed Guns A100C CONVENTIONAL AUTOMATIC SPRAY GUN FLUID ORIFICE x MAXIMUM MATERIAL TYPE PRESS. / SIPHON AIR CAP PATTERN WIDTH Very Thin 0.6, 0.7 mm x 2163 less than 16 sec.