Set The Answer Mode; Announcements; Record An Announcement - Philips CD2752S/90 User Manual

Set the answer mode

You can set the answering machine and
select if the callers can leave messages. Select
[ANSWER & REC.] if you allow the callers to
leave messages. Select [ANSWER ONLY] if you
forbid the callers to leave messages.
1
Press MENU.
2
Select [ANSWER MACHINE] >
[ANSWER MODE], then press [OK] to
confirm.
3
Select an answer mode, then press [OK]
to confirm.
The setting is saved.
»
Note
•
If the memory is full, the answering machine
switches to [ANSWER ONLY] mode
automatically.

Announcements

The announcement is the message your caller
hears when the answering machine picks up the
call. The answering machine has 2 pre-recorded
announcements: the [ANSWER & REC.] mode
and [ANSWER ONLY] mode.
EN
34

Record an announcement

The maximum length of the announcement
you can record is 3 minutes. The newly
recorded announcement automatically
replaces the old one.
1
Press MENU.
2
Select [ANSWER MACHINE] >
[ANNOUNCEMENT], then press [OK]
to confirm.
3
Select [ANSWER & REC.] or [ANSWER
ONLY], then press [OK] to confirm.
4
Select [RECORD], then press [OK] to
confirm.
5
Recording starts after the beep.
6
Press [OK] to stop recording or the
recording stops after 3 minutes.
You can listen to the newly recorded
»
announcement on the handset.
Note
•
To restore the pre-recorded announcement,
delete your current announcement.
Note
•
Ensure that you speak close to the microphone
when you record an announcement.