Advertisement
NOTE: Whilst mounting orientation is at your discretion, the winch is to be operated with the wire rope in an under wound orientation on
the drum. The winch is designed to rope out and rope in, in one direction. DO NOT attempt to reverse the operation of the winch.
WARNING! DO NOT weld or machine any part of the winch, this will weaken it and void the warranty.
WARNING! Batteries contain explosive gases. The following precautions should be taken before making battery connections: wear eye
protection; remove all jewellery; follow the wiring diagram included in the installation instructions; keep spectators away. In the event of a
battery explosion, acid should be washed away as soon as possible, seek medical help immediately.
WARNING! Use of any other accessories or attachments other than those recommended in this instruction manual may result in personal
injury or property damage and could void the warranty.
NOTE: The safety precautions and instructions discussed in this manual can't cover all possible conditions and situations that may occur. It
must be understood by the operator that common sense and caution are factors which cannot be built into this product but must be applied
by the operator.
2.
SPECIFICATIONS & PERFORMANCE
The Industrial Recovery Winch range is designed and built for breakdown recovery and off road use. Three model ranges from 5675kg line pull
to 8180kg line pull. All three have heavy duty motors with 4-stage planetary gears using oversized components for greater torque plus automatic
'in drum' brake. All models have weather sealed solenoids and ergonomic 'lift & turn' free spool clutches. Supplied with units: wire rope with
latched hook, 4-way roller fairlead with mounting bracket and plug in hand held controller included as standard. Ideal for flat bed pick up or other
recovery trucks.
Model No: . . . . . . . . . . . RW5675. . . . . . . . . . . . RW6815 . . . . . . . . . . . . .RW8180
Voltage: . . . . . . . . . . . . 12V . . . . . . . . . . . . . . 12V . . . . . . . . . . . . . . .12V
Line Pull*: . . . . . . . . . . . 5675kg . . . . . . . . . . . . 6815kg . . . . . . . . . . . . .8180kg
Motor Power: . . . . . . . . . 2kW . . . . . . . . . . . . . . 2.2kW . . . . . . . . . . . . . .2.3kW
Gear Ratio: . . . . . . . . . . 516:1 . . . . . . . . . . . . . 516:1 . . . . . . . . . . . . . .516:1
Line Speed*:
No Load: . . . . . . . . . . . 3.5mtr/min. . . . . . . . . . . 3.5mtr/min. . . . . . . . . . . .3.5mtr/min
At Maximum Load: . . . . . . 1.2mtr/min. . . . . . . . . . . 1.0mtr/min. . . . . . . . . . . .0.8mtr/min
current Draw:
No Load: . . . . . . . . . . . 90A . . . . . . . . . . . . . . 95A . . . . . . . . . . . . . . .95A
At Maximum Load: . . . . . . 300A . . . . . . . . . . . . . 380A. . . . . . . . . . . . . . .420A
cable Ø: . . . . . . . . . . . 10.3mm . . . . . . . . . . . . 11.5mm . . . . . . . . . . . . .13mm
cable Length: . . . . . . . . . 29mtr . . . . . . . . . . . . . 28mtr . . . . . . . . . . . . . .25mtr
Winch Weight: . . . . . . . . 68kg. . . . . . . . . . . . . . 74kg . . . . . . . . . . . . . . .74kg
Gross Weight:. . . . . . . . . 75kg. . . . . . . . . . . . . . 79kg . . . . . . . . . . . . . . .79kg
Replacement Wire Rope: . . . RW5675.WR . . . . . . . . . RW6815.WR . . . . . . . . . .RW8180.WR
* Performance quoted at first layer of cable on drum
Fig.1
Fig.2
Fig.3
Fig.4
Advertisement
