Table of Contents
Advertisement
2.
Enter the required settings for connecting the computer remotely.
The image on your TV may differ from the image above depending on the model and geographical area.
1.
Enter the IP address of the PC you want to connect to.
• In case of Windows, when the computer to connect is within the same network (router/AP), run "cmd" command
in Settings
Network and Internet
check the IPv4 address of the computer.
• In case of Mac, you can check the IP address in Settings
• When the TV and computer are not within the same network, it is required to know the public IP and configure
the router and AP. Check whether the router connected to the computer supports port forwarding. When the
company provides additional security features such as firewall, seek help from a security officer.
Connect to Remote PC
Make sure the PC is on and remote access is set to "Allow".
PC/Profile
IP address or profile
Username
Enter a username.
Protocol
Password
Enter a password.
Remember my credentials (PC/Profile, Username, Protocol and Password)
Connect
View Network properties or in Start
Home
Manage User Profiles
RDP (for Windows users)
Cancel
Remote Access.
Office
- 57 -
Run, and then run "ipconfig" to
Advertisement
Table of Contents
