Table of Contents
Advertisement
From the base
•
To start/Stop listening, press
•
To adjust the volume, press
•
To play the previous message/Replay the
current message, press .
•
To play the next message, press
•
To delete the current message, press
Note
•
No deleted messages can be recovered.
From the handset
1
Select [Menu] > [Answ. Machine] >
[Play], then press [OK] to confirm.
»
New messages start playing. Old
messages start playing if there is no
new message.
[Back] to stop listening.
•
Press
[Option] to enter the options
•
Press
menu.
•
Press
/
volume.
Delete an incoming message
From the base
Press
when you listen to the message.
The current message is deleted.
»
From the handset
1
When you listen to the message, press
[Option] to enter the options menu.
2
Select [Delete], then press [OK] to confirm.
» The current message is deleted.
Delete all old incoming messages
From the base
Press and hold
in standby mode.
»
All old messages are permanently
deleted.
EN
32
.
/ .
.
to increase/decrease the
From the handset
1
Select [Menu] > [Answ. Machine] >
[Delete all], then press [OK] to confirm.
»
2
Press [OK] to confirm.
.
»
Note
•
You can delete the read messages only. No
deleted messages can be recovered.
Call screening
You can hear the caller while he is leaving a
message. Press
From the base
Press
/
during call screening. The lowest volume level
turns off the call screening.
Set the ring delay
You can set the number of times the phone
rings before the answering machine picks up
the call.
1
Select [Menu] > [Answ. Machine] >
[Ring delay], then press [OK] to confirm.
2
Select a new setting, then press [OK] to
confirm.
»
Note
•
Ensure that the answering machine is switched
on before this feature can be applied.
The handset displays a confirmation
request.
All old messages are permanently
deleted.
to pick up the call.
to adjust the speaker volume
The setting is saved.
Advertisement
Table of Contents
