Connecting Your System - Dragon Touch KB10 Quick Start Manual

IPC (IP Camera)
IR Lights

CONNECTING YOUR SYSTEM

Hard Disk Installation
The NVR system requires a SATA internal hard drive or mobile hard disk drive for
video recording. The system can display real-time video, but you can't record or
playback video footage without installing a hard drive. The system supports an up
to 8TB hard drive.
3
Antenna
DC Jack
RJ45 Port
Lens
LED Light
SATA Internal Hard Drive Installation
The system supports a 3.5" or 2.5" SATA internal hard drive (A 2.5" SATA internal
hard drive needs a bracket to hold the HDD).
1. Remove the screws
3. Connect the data wire
5. Secure the screws of the hard drive
Note:
•
• The system cannot record or playback video without a hard drive.
2. Remove the cover
4. Connect the power wire
6. Put the cover back, and secure
the screws of the cover
4