Advertisement
or disable the voice assistant.
Power Saving Setting
After the speaker is turned on, if it is not connected to a Bluetooth device, it will automatically
turn off after 15 minutes.
Reset Paired Device List
After power on, press the Volume "+" and Volume "-" Buttons simultaneously for about 3
seconds.
LED Indicator Guide
Status
Power On
Power Off
Pairing
Bluetooth connected
Bluetooth playback
Battery low
Charging
Battery Use Caution
•
Fully charge before use.
•
It is not recommended to replace the battery privately.
•
The battery (battery pack or battery pack combination) must not be exposed to
sunshine, fire or similar overheated environments.
FCC Statement
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
Description
Function indicator: White LED stays on about 1 second
Function indicator: LED off
Function indicator: White LED breathing
Function indicator: LED off
Function indicator: LED off
-
Function Indicator: Red LED lights when charging, turns off
after fully charged
Voice/Tone
Opening Tone
"Goodbye"
"Discovering"
"Your device is connected"
-
"Battery low"
-
Advertisement
