Fig. 40: Removing The Compressor Casing - ABB HT608783 Operation Manual

Operation Manual / A170-M.. - A175-M..
9 Disassembly and assembly / 9.5 Removing the compressor casing
Removing the compressor casing
Fig. 40: Removing the compressor casing
1. Using screws (90196) and washers (90198), fasten lifting device (90190 / 90195) to com-
pressor casing (72000) and secure to crane.
2. Loosen and remove nuts (61037).
3. Use press-off nuts (61090) to fully press off and remove compressor casing (72000).
4. Remove and dispose of the O-ring (42012).
© Copyright 2021 ABB. All rights reserved. HZTL4033_EN Rev.I November 2021