Panasonic KX-TG3760 Operating Instructions Manual page 19

Important:
R When 3 Bluetooth devices (2 cellular
phones and 1 headset) are paired to the
base unit, only 2 Bluetooth devices can be
used with the unit at the same time, and the
base unit loses its connection from other
Bluetooth devices. To automatically resume
the connection to Bluetooth devices, leave
the auto connection on.
R Some cellular phones lose connection after
usage, please check the specifications of
your cellular phone for more details.
1
MMENUN#632
2
MbN: Select the desired setting. a
MSAVEN a MOFFN
Note:
R Some cellular phones may ask you if you
accept the connection requirement from the
base unit. In that case, select "Off" in step
2. Check the specifications of your cellular
phone.
Connecting/disconnecting the
cellular phone manually
If you will not be using the paired cellular
phone's link to cell feature temporarily (for
example, you do not want the unit to ring
when your cellular line receives a call), you
can disconnect your cellular phone from the
base unit. If you want to use it again,
reconnect the cellular phone to the base unit.
Note:
R After you disconnect a paired cellular
phone from the base unit manually, it will
automatically be connected to the base unit
in 30 minutes. If you do not use the link to
cell feature anymore, unpair the cellular
phone (page 18).
R A disconnected cellular phone is not
unpaired from the base unit, so pairing it to
the base unit again is unnecessary.
1
To connect/disconnect:
For CELL 1: MMENUN#6251
For CELL 2: MMENUN#6252
R A long beep sounds.
2
MOFFN
For assistance, please visit http://shop.panasonic.com/support
Cellular line only mode (If you do
not use the landline)
If you do not use the landline, we recommend
setting the unit to the cellular line only mode.
The default setting is "Off".
Important:
R If you turn on the "Cell line only
mode", disconnect the telephone line cord
from the base unit. Otherwise the "Cell
line only mode" cannot be activated.
1
MMENUN#157
2
To turn on:
MbN: "On" a MSELECTN a MbN: "Yes"
a MSELECTN
To turn off:
MbN: "Off" a MSELECTN
Note:
R Once you set this mode, you can press
M N or MZN instead of MCELLN
(page 21) to make cellular calls for the
handset.
R Once you set this mode, the following
features cannot be used:
– Landline features (page 38)
– Answering system (page 51)
Messages cannot be received.
– Voicemail features (page 56)
R After this mode is turned on or off, the base
unit reboots.
– Bluetooth connections from cellular
phones or Bluetooth headset are
disconnected. If the auto connection is
turned on (page 18), the cellular phones
are reconnected.
– will be displayed on the handset
momentarily. The handset can be used
once is displayed.
When you use the landline again
Before connecting the telephone line to the
base unit, select "Off" in step 2, "Cellular line
only mode (If you do not use the landline)",
page 19.
Link to Cell
19