Table of Contents
Advertisement
Setting up a Sprint PCS Wireless Web Connection
Getting Started
Your wireless Internet-ready Sprint PCS Phone allows you to connect to a laptop PC, hand-held or palm-
sized computing device to send and receive email, access the Internet or your company's network and
more, without searching for a wall-mounted telephone jack. In just three steps, you can use your
connectivity:
First, you'll need a Sprint PCS Wireless Web
1.
Connect your laptop PC to your Sprint PCS Phone by using the serial data cable. The cable adapter will
2.
connect to a hand-held or palm-sized computing device.
Finally, take a few minutes to install the Sprint PCS Dialer
3.
CD.
For complete details on how to install and use this software, refer to the user guide in the Sprint PCS
_
Wireless Web Connection Kit you purchased.
Placing a Call
To place a call while you're connected to the Sprint PCS Wireless Web:
First, make sure the cable is connected properly.
1.
Open the Sprint PCS Dialer software or application on your computer and place the call.
2.
The phone displays the number your computer is calling and a "connecting" message is displayed.
_
Once the call successfully connects, your phone's display shows you information on the status of the
_
data call.
Receiving Sprint PCS Wireless Data and Fax Calls
Most users use the Sprint PCS Wireless Web Connection to place outgoing data/fax calls. But you can
also set up your Sprint PCS Phone to receive (host) data and fax calls.
Because each phone model is different, the Sprint PCS Wireless Web Connection Kit doesn't include
instructions for how to set up your phone to receive data and fax calls.
Here's the procedure to set up your Sprint PCS Phone to receive a (mobile-terminated) data or fax call:
Receiving a Fax or Data Call
Ensure that your Sprint PCS Phone is connected to your computing device and is powered on.
1.
From the Main Menu press
2.
4
Press
for
GHI
Connection
3.
Use the scroll keys to select
4.
Press
OK
to save the setting. The screen displays
5.
then returns to standby mode and displays
Once you have set your phone's mode to
until you change back to "Voice".
In the Fax program on your PC, setup the Answer mode. Click on "Receive" and select one of the
6.
Connection Kit (sold separately).
™
2
for
ABC
WirelessWeb
.
" or
Fax Only
Data Only
" incoming voice calls can be received
"FaxOnly*
" or
Fax Only
software onto your computer using your
SM
.
".
" or
" above the greeting.
"DataOnly*
", you cannot receive regular voice calls
Data Only
73
". Your phone
Advertisement
Table of Contents
