Removing The Air Inlets; Fig. 40: Removing The Air Inlets - ABB HT610305 Operation Manual

Operation Manual / A130-M.. - A145-M..
9 Dismantling and fitting / 9.4 Removing the air inlets
9.4

Removing the air inlets

Mark the casing position for assembly.
u
Fig. 40: Removing the air inlets
1. Attach lifting gear to the filter silencer (81000) or air suction branch (82000).
2. Loosen and remove V-clamp (72020).
3. Remove filter silencer (81000) or air suction branch (82000), set it down properly in an
appropriate place and secure it.
4. Remove and dispose of the O-ring (81010 / 82010).
© Copyright 2021 ABB. All rights reserved. HZTL4031_EN Rev.N March 2021