Table of Contents
Advertisement
2.1 A Quick Tour of TREK-120
Installation Procedures
2.2.1 Setup TREK-120 NFC reader
a. Connect NFC reader to a PC or notebook USB port.
b. Download Cold Chain SDK from the website :
c. Unzip SDK file (Password is the same as the file name) and Launch coldchain_demo.exe.
d. Go to "Setting", and then select COM port which NFC reader connected then press "Open".
2.2.2 Setup TREK-120 Temperature/humidity sensor
a. Put TREK-120 on the NFC reader. (Note : Please check NFC logo on TREK-120 close to NFC
reader 4 LED area to ensure better transmission quality.)
Advertisement
Table of Contents
