APH MultiView TI-30XS Quick Start Manual

Orion TI-30XS MultiView™ Talking
Scientific Calculator QUICK-START
GUIDE
©2015, The American Printing House for the Blind, Inc.
This Quick-Start Guide explains how to prepare the Orion TI-30XS MultiView™ to be
charged and operational. It is imperative that this calculator be fully charged prior
to first-time use. Please see the Orion TI-30XS MultiView™ Talking Scientific Calculator
Manual and TI-30XS MultiView™ User Guide, found on the accompanying USB flash drive,
for more information and details.
Included in the box are the following items:
Orion TI-30XS MultiView™ Talking Scientific Calculator
•
Hard slide cover (PN: 45-004-025)
•
Original TI-30XS MultiView™ hard snap cover
•
Standard A male to Micro-B male USB cable
•
USB wall plug
•
Earphones
•
USB flash drive with documentation and software
•
Quick-Start Guide in braille format
•

Getting Started

First, unpack all materials and check that everything needed is there. The Orion TI-30XS
MultiView™ comes with a built in user-replaceable chargeable battery.

Procedure for Charging

1. Hold the calculator in its operating position so that the keys are face up and the
access keys are toward the top of the device.
2. Plug the Micro-B end of the USB cable into the Micro-B port on the side at the top
of the device.
3. Plug the standard A male end of the USB cable into the USB wall adapter.
4. Plug the wall adapter into the wall socket.
Note: Fully charge the battery prior to first-time use of the calculator. This should take
about 4 hours. The calculator can be used while it is charging.

Operation Procedure

1. To turn the device on, press the ON key located at the lower left-hand corner of
the calculator.

Parts List

Quick-Start Guide in print format