Advertisement
Front Panel
1.
Bluetooth LED: This LED will be lit solid when a Bluetooth device is connected.
2.
Alarm LED: This LED will be lit solid when an alarm is enabled.
3.
Display: Shows the current time, alarm time, or temperature.
4.
PM LED: This LED will be lit to indicate PM time.
5.
Microphone: This microphone will pick up your voice when receiving calls on a connected
device.
Rear Panel
1.
Power Input: Use the included power adapter to connect this input to a power outlet.
2.
Aux Input: This stereo 1/8" (3.5 mm) input can be used to connect a CD player, MP3
player, or other audio source.
Note: Only one audio source (Bluetooth, Aux or USB) can play at a time.
3.
Temperature Gauge: This gauge will take the current temperature to show on the display.
4.
USB Port: Connect a USB flash drive to this port to play back MP3 or WAV audio files.
Use the Play/Pause and Minus/Plus (-/+) buttons to control playback and volume.
5.
USB Charge Port: Connect a device's charge cable here to charge it. You can
simultaneously charge one device using the wireless Qi pad and one device using the
wired charge port.
Note: Playing music may reduce the rate of charging per device.
1
2
1 2
3
4
3
4
5
5
5
Advertisement
