Bluetooth - Kenwood NX-3200E3 User Manual

If your transceiver has been programmed with the Bluetooth function, you can
connect your transceiver with a Bluetooth headset to make hands-free calls.
The Bluetooth specifications are as follows.
Version : Version 4.0
Power class : Class 2 (2.5 mW, up to 10 m)
Profile : Headset Profile (HSP), Serial Port Profile (SPP), Heart Rate
Service*, Automatic Injury Detection Service*, Battery Service*,
Device Information Service*
Refer to the table below for more details on each profile.
*: Supported on Portable transceivers (full button model and
standard button model) only
Device class : Phone
Note:
The communication distance varies depending on the obstacles between the
●
communication devices and the radio wave conditions.
Only headsets which support the Headset Profile (HSP) certified by Bluetooth SIG can be
●
used with the transceiver. However, operations are not guaranteed in all headsets.
Refer to the following URL for details on the Bluetooth devices operationally tested by
●
KENWOOD:
http://manual2.jvckenwood.com/com/help_ref/nx5000_series/compatible_model_list/CNMJSYnnzoitpv.html
If you wish to use a Bluetooth device that is not operationally tested, please consult your
dealer.
If the Bluetooth Data setting is enabled by your dealer, you can use the Serial Port
Profile, Heart Rate Service, Automatic Injury Detection Service, Battery Service and
Device Information Service.
Profile
Headset Profile (HSP)
Serial Port Profile (SPP)
56

Bluetooth

Headset Profile provides support for Bluetooth
headsets to be used with this transceiver for making
voice calls.
Serial Port Profile allows this transceiver to connect to
a Bluetooth-enabled PC without using a programming
cable to communicate with the Field Programming Unit
(FPU) or to use the PC Interface Protocol. For details
on the Field Programming Unit (FPU) or PC Interface
Protocol, consult your dealer.
Description