Getac Technology 8212X User Manual

Table of Contents

Quick Links

Download this manual

User's Manual

(November 2007)

Table of Contents

Need help?

Do you have a question about the 8212X and is the answer not in the manual?

Questions and answers

Summary of Contents for Getac Technology 8212X

Page 1 User’s Manual (November 2007)
Page 2 WARNING Do not attempt to disassemble your notebook computer. Doing so may void your warranty. There are no serviceable parts inside. Please refer all servicing to a qualified personnel. TRADEMARKS The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. All brand and product names are trademarks or registered trademarks of their respective companies.
Page 3: Table Of Contents
Table of Contents Preface ..................v Notational Conventions............vi Chapter 1 Getting Started...........1-1 Getting the Computer Running ..........1-2 Unpacking ................ 1-2 Connecting to AC Power ..........1-2 Opening the Cover ............1-4 Turning On and Off the Computer........1-4 Taking a Look at the Computer..........1-6 Right-Side Components ...........
Page 4 Hot Keys ................2-7 Using the Touchpad ............2-10 Configuring the Touchpad ..........2-12 Using the DVD Drive (Optional) ........2-12 Inserting and Removing a Disc ........2-14 Using the Video Features ........... 2-16 Configuring the Display Modes ........2-16 Using the Audio Features ...........
Page 5 Inserting and Removing a Smart Card ......4-4 Using PC Cards ..............4-6 Inserting and Removing a PC Card........4-6 Using the Card Reader ............4-8 Internal Components Upgrade..........4-10 Chapter 5 Using BIOS Setup ..........5-1 When and How to Use BIOS Setup ........5-2 When to Use..............
Page 6 Chapter 8 Troubleshooting..........8-1 Preliminary Checklist ............8-2 Solving Common Problems..........8-3 Battery Problems.............. 8-4 DVD Drive Problems ............8-4 Display Problems ............. 8-5 Hardware Device Problems..........8-6 Hard Disk Drive Problems ..........8-7 Keyboard, Mouse, and Touchpad Problems ....8-7 LAN Problems ..............
Page 7: Preface
Preface This manual contains information that will help you operate the computer. It is divided into 8 chapters, 2 appendices, and an index. Chapter 1, Getting Started, takes you through the process of setting up the computer and identifying its external components. Chapter 2, Operating Your Computer, tells you how to use the computer’s components and features.
Page 8: Notational Conventions
Notational Conventions Throughout this manual, the following conventions are used to distinguish elements of text. NOTE: identifies additional information that requires special attention. CAUTION: identifies important information that, if not followed, may result in loss of data or damage to the computer. Keyboard keys are shown in a bold typeset.
Page 9: Getting Started
Chapter 1 CHAPTER Getting Started Congratulations on purchasing this computer. Your computer incorporates desktop computer capabilities into a compact notebook-sized package. It can greatly enhance your productivity either in the office or at home. And, of course, wherever you need it, the computer is ready and easy “to go.” This chapter first tells you step by step how to get the computer up and running.
Page 10: Getting The Computer Running
Getting the Computer Running This section guides you through the procedures for getting the computer ready for operation. Unpacking After unpacking the shipping carton, you should find these standard items: Notebook computer Accessories: − AC adapter − AC power cord −...
Page 11 3. Plug the female end of the AC power cord to the AC adapter and the male end to an electrical outlet ( ). 4. When the AC adapter is connected, power is being supplied from the electrical outlet to the AC adapter and onto your computer. Now, you are ready to turn on the computer.
Page 12: Opening The Cover
Opening the Cover CAUTION: Be gentle when opening and closing the cover. Opening it vigorously or slamming it shut could damage the computer. Open the top cover by lifting up the cover. You can tilt the cover forward or backward for optimal viewing clarity. Turning On and Off the Computer Turning On 1.
Page 13 2. Press the power button. 3. Each time the computer is turned on, it performs a Power-On Self Test (POST), and the Windows operating system should start. Turning Off To turn off the computer power, use the “Shut Down” command of your operating system.
Page 14: Taking A Look At The Computer
Taking a Look at the Computer This section identifies the external components of the computer and briefly describes the function of each component. NOTE: Depending on the model you purchased, the appearance of your computer may not be exactly the same as those shown in this manual. Right-Side Components Component Description...
Page 15: Left-Side Components
Left-Side Components Component Description See Also Connects an external display. P. 4-2 VGA Connector RF (radio Serves as the master switch that allows you to P. 2-29, turn the wireless LAN radio, Bluetooth radio, 2-33, frequency) On/Off and WWAN on/off. Switch Connects a USB device, such as a flash disk, P.
Page 16: Rear Components
Rear Components Component Description See Also Kensington Lock Locks the computer to a stationery object for P. 7-4 security. Power Connector Connects the AC adapter. P. 1-2 Getting Started...
Page 17: Bottom Components
Bottom Components Component Description See Also Battery pack supplies power to your P. 3-3 Battery computer when external power is not Compartment connected. Also contains the optional 3G SIM card slot. P. 2-37 Inside is the mini PCI-E slot for using a mini P.
Page 18: Top-Open Components
Top-open Components Component Description See Also Displays the output of the computer. P. 4-2 LCD Screen Quick Buttons P1 (Program 1 – user customized) quick launch P. 6-6 key. Default is Microsoft® Internet Explorer. Enables/disables power saving when using P. 2-4 battery power.
Page 19 Component Description See Also Show the current status of the computer’s Indicators devices. Caps Lock indicator P. 2-5 Num Lock indicator P. 2-5 Hard disk drive / optical drive in-use indicator P. 2-12 Turns the computer power ON and OFF. P.
Page 20 Component Description See Also Lights blue when the battery is being charged P. 3-3 Battery charge with 90 % battery capacity remaining. indicator Lights red when the battery is being charged with less than 90 % battery capacity remaining. Blinks red when the battery’s capacity is below 10 %.
Page 21: Where To Go From Here
Where to Go from Here As your computer is ready for operation, you may want to do any of the following now: For this purpose... Do this... To know more about the computer... Go on to the next chapter. To install the operating system if your See the operating system manual.
Page 22: Operating Your Computer
Chapter 2 CHAPTER Operating Your Computer This chapter provides information about the use of the computer. If you are new to computers, reading this chapter will help you learn the operating basics. If you are already a computer user but are new to notebook computers, you may choose to read only the parts containing information unique to your computer.
Page 23: Starting And Stopping The Computer
Starting and Stopping the Computer There are a number of ways to start and stop the computer. Starting the Computer You always start the computer using the power button. A computer starts up with an operating system (OS) existing on the storage device such as the hard disk and optical disc.
Page 24 To stop in Do this... To start up or this mode... resume again Hibernation Depending on your settings in Windows, Press the power you can place the computer in button. Hibernation mode by: • Closing the display cover • Pressing the power button If you choose to stop in Sleep/Standby or Hibernation mode, you can return to where you left off the next time you start up the computer.
Page 25: Using The Quick Buttons
Using the Quick Buttons Located on top of the keyboard are two quick buttons: P1 (Program 1 – user customized) quick launch button (P1). Default is Microsoft® Internet Explorer. See chapter 6 for more details. ECO button ( ) to enter into power saving mode when using battery power.
Page 26: Using The Keyboard
Using the Keyboard Your keyboard has all the standard functions of a full-sized computer keyboard plus a key added for specific functions. The standard functions of the keyboard can be further divided into four major categories: Typewriter keys Cursor-control keys Numeric keys Function keys Typewriter Keys...
Page 27: Cursor-Control Keys
Cursor-Control Keys NOTE: The word “cursor” refers to the indicator on the screen that lets you know exactly where on your screen anything you type will appear. It can take the form of a vertical or horizontal line, a block, or one of many other shapes. Numeric Keypad A 15-key numeric keypad is embedded in the typewriter keys as shown next:...
Page 28: Function Keys
Numeric keys facilitate entering of numbers and calculations. When Num Lock is on, the numeric keys are activated; meaning you can use these keys to enter numerals. NOTE: When the numeric keypad is activated and you need to type the English letter in the keypad area, you can turn Num Lock off or you can press Fn and then the letter without turning Num Lock off.
Page 29 Description Switches the wireless LAN radio on and off. Decreases the sound volume. Increases the sound volume. Switches the display output to one of the following when external devices are connected. Upon booting the system with CRT: NOTE: This function only applies to Plug & Play display devices.
Page 30 Euro Symbol You can press the euro dollar sign on various keyboards. To press the euro sign on a United States-International keyboard, hold down the key and press (which has an euro sign on it). Alt Gr To press the euro sign on a standard United States keyboard, hold down either of the keys and type on the numeric keypad part...
Page 31: Using The Touchpad
Using the Touchpad CAUTION: Do not use a sharp object such as a pen on the touchpad. Doing so may damage the touchpad surface. NOTE: For optimal performance of the touchpad, keep your fingers and the pads clean and dry. When tapping on the pad, tap lightly. Do not use excessive force. The touchpad is a pointing device that allows you to communicate with the computer by controlling the location of the pointer on the screen and making selection with the buttons.
Page 32 Here are some common terms that you should know when using the touchpad: Term Action Point Move your finger on the pad until the cursor points to the selection on the screen. Click Press and release the left button. –or– Tap gently anywhere on the pad.
Page 33: Configuring The Touchpad
Configuring the Touchpad You may want to configure the touchpad to suit your needs. For example, if you are a left-handed user, you can swap the two buttons so that you can use the right button as the left button and vice versa. You can also change the size of the on-screen pointer, the speed of the pointer, and so on.
Page 34: Using The Dvd Drive (Optional)
Using the DVD Drive (Optional) You can connect an external DVD drive, usually configured as drive D to your computer. Depending on the model, your drive is one of the following: DVD Dual drive can work both as a DVD-ROM drive for reading DVD (Digital Versatile Disc) discs in addition to CDs, audio CDs and CD-R/-RW discs, and CD-RW drive.
Page 35: Inserting And Removing A Disc
Inserting and Removing a Disc Follow this procedure to insert or remove a disc: 1. Turn on the computer. 2. Plug the DC cord of the AC adapter to the power connector of the DVD drive ( ) and the male end to an electrical outlet ( ). Connect the mini-USB end of the USB Y-cable to the mini-USB port ( ) of the DVD drive and the other end to your computer ( ).
Page 36 4. To insert a disc, place down the disc in the tray with its label facing up. Slightly press the center of the disc until it clicks into place. In-use indicator Eject button To remove a disc, hold the disc by its outer edge and lift it up from the tray.
Page 37: Using The Video Features
Using the Video Features The video subsystem of your computer features: 12.1-inch TFT (Thin-Film Transistor) color LCD display with 1280×800 WXGA resolution Simultaneous display on LCD and external display, which is useful when you have a presentation as you can control the screen from your computer and face the audience at the same time.
Page 38 For displaying in higher resolutions, you can connect an external monitor that supports higher resolutions. (See “Connecting an External Monitor” in Chapter 4 for more information.) Operating Your Computer 2-17...
Page 39: Using The Audio Features
Using the Audio Features NOTE: To take advantage of the enhanced audio capabilities, the audio driver supplied with your computer must be installed. (See chapter 6 for details.) If you experience interference while recording, try lowering the microphone recording volume. The audio subsystem of your computer features: Built-in sound system for recording and playing sound on your computer...
Page 40: Connecting Audio Devices
Connecting Audio Devices For higher audio quality, you can send or receive sound through external audio devices. NOTE: After connecting an external audio device, make sure that you specify the use of the correct audio device in Windows. Audio Output Connector ( ) can be connected to speakers, headphones, or earphone set.
Page 41 Adjusting the Recording Volume When the recorded volume via the built-in microphone is too low, you can adjust it by performing the following: Using Windows Vista When adjusting via the Volume icon on the system tray. 1. Right-click the Volume icon on your Windows system tray and select Recording Devices.
Page 42 2. Double-click the Microphone option and the Microphone Properties screen appears. Click the Levels folder and manually use the slider to increase the level of Microphone Boost. 3. Click OK to exit. When adjusting via the Realtek HD Audio Manager icon on the system tray.
Page 43 2. The Realtek HD Audio Manager screen appears, click the Microphone folder. 3. Click the Microphone Boost icon. Operating Your Computer 2-22...
Page 44 4. Manually use the slider to increase the level of Microphone Boost. 5. Click OK to exit. Operating Your Computer 2-23...
Page 45 Using Windows XP When adjusting via the Volume icon on the system tray. 1. Double-click the Volume icon on your Windows system tray and the Master Volume window appears. Click Options Properties. 2. The Properties window appears. Click to enable the Mic Volume item (a checkmark appears).
Page 46 3. Click Options Advanced Controls. The last column Mic Volume would show on screen. 4. Click the Advanced button and the Advanced Controls for Mic Volume window appears. 5. Click to enable the item Microphone Boost. Click Close to exit. Operating Your Computer 2-25...
Page 47 When adjusting via the Realtek HD Audio Manager icon on the system tray. 1. Right-click the Realtek HD Audio Manager icon on your Windows system tray and select Realtek HD Audio Manager. 2. The Realtek HD Audio Manager screen appears, click the Mixer folder. 3.
Page 48: Using The Communication Features
Using the Communication Features Using the Modem NOTE: To take advantage of the modem feature, the modem driver supplied with your computer must be installed. (See chapter 6 for details.) The internal 56 K fax/data modem allows you to use the telephone line to communicate with others by fax, email, or connect to an online service or bulletin board.
Page 49: Using The Lan
Using the LAN NOTE: To take advantage of the LAN feature, the LAN driver supplied with your computer must be installed. (See chapter 6 for details.) The internal 10/100/1000Base-T LAN (Local Area Network) module allows you to connect your computer to a network. It supports data transfer rate up to 1000 Mbps.
Page 50: Using The Wireless Lan
Using the Wireless LAN Depending on your model, an internal mini PCI-E wireless LAN (WLAN) card may have been pre-installed by your computer manufacturer at the factory. This card allows you to access corporate networks or the Internet in a wireless environment. The WLAN features include: Peer-to-Peer (Ad-Hoc) and Access Point (Infrastructure) modes support...
Page 51 To turn on the WLAN radio: 1. Make sure that the RF switch is at the ON position. 2. Press to turn on the WLAN radio (see “Hot Keys” in Chapter 2), indicated by the WLAN indicator ( ) glowing in blue when If you need to temporarily turn off the radio, press .
Page 52 3. If any wireless network is detected, the following window appears on screen. Click the Show drop down menu and select Wireless. 4. Select a wireless network to connect to by clicking a selection, then click Connect. 5. Depending on the settings, you may be asked to enter a WEP key (refer to your Windows online help for more information on setting a wireless network connection).
Page 53 2. Double-click the Wireless Network Connection icon located on your Windows system tray. If any wireless network is detected, the following window appears on screen. 3. Select a wireless network to connect to by clicking a selection, then click Connect. 4.
Page 54: Using The Bluetooth ® Wireless Feature
Using the Bluetooth Wireless Feature ® NOTE: To take advantage of the Bluetooth feature, the Bluetooth driver supplied with your computer must be installed. (See chapter 6 for details.) Depending on your model, your computer may incorporate the Bluetooth capability for short-range (about 10 meters) wireless communications between devices without requiring a cable connection.
Page 55 3. The following appears onscreen. To turn on the Bluetooth feature, click the Bluetooth quick button. The Bluetooth indicator ( ) will glow in blue. By default, your computer is in the general discoverable and pairable mode after the Bluetooth feature is turned on. 4.
Page 56 3. Click IVT BlueSoleil and then BlueSoleil. The following screen appears. 4. Click View, then Refresh Devices to check if any Bluetooth device is detected. Operating Your Computer 2-35...
Page 57 5. To connect to a new device, click Tools then click Add New Device. 6. Depending on the type of Bluetooth device that you want to connect to, you will need to enter the pertinent information. For detailed information on using the Bluetooth Utility, see the Bluetooth Utility Help on your computer by clicking on Help, then Contents and Index.
Page 58: Using The 3G Feature (Optional)
Using the 3G Feature (Optional) NOTE: To take advantage of the 3G feature, the 3G driver (includes the software application) supplied with your computer must be installed. (See chapter 6 for details.) 3G is the third generation of mobile phone standards and technology, after 2G.
Page 59 4. Slide the battery release lever outward to the unlock ( ) position ( ) and, while holding it in the unlock position, remove the battery pack off the computer ( ). 5. Locate the SIM card slot and insert the SIM card into the holder. Make sure the beveled corner on the SIM card is facing towards the computer and that the golden contact area on the card is facing downwards.
Page 60 6. Fit another battery pack into place and slide the battery security lock to the lock ( ) position. WARNING: Keep all SIM cards out of the reach of small children. For availability and information on using SIM card services, contact your SIM card vendor. This may be the service provider, network operator, or other vendor.
Page 61 3. The following appears onscreen. To turn on the 3G feature, click the 3G quick button. The 3G indicator ( ) will glow in blue. 4. To turn off the 3G feature, click the 3G quick button again. You can use the 3G software application to configure 3G connection settings.
Page 62: Using The Fingerprint Sensor
Using the Fingerprint Sensor To start using the fingerprint sensor: 1. Locate the fingerprint sensor. 2. Go to Start menu Programs Protector Suite QL Control Center. The following screen appears. The computer features the Fingerprint Control Center utility for enrolling your fingers for added security.
Page 63: Enrolling Fingerprints
Enrolling Fingerprints To start enrolling your fingerprint(s): 1. Click Fingerprints on the main menu. 2. Then click Initialize. Operating Your Computer 2-42...
Page 64 3. The following screen appears. Read carefully the contents of the Welcome screen and then click Next to continue. 4. Follow the onscreen instructions to complete enrolling your fingerprint(s). Operating Your Computer 2-43...
Page 65: Changing The Settings
Changing the Settings To change the settings of your fingerprint software: 1. Click Settings on the main screen. 2. Then click System Settings. Operating Your Computer 2-44...
Page 66 3. The following screen appears. Proceed to make the necessary settings to your fingerprint software. 4. Click OK after you have finished with your settings. Operating Your Computer 2-45...
Page 67: Managing Power
Chapter 3 CHAPTER Managing Power Your computer operates either on external AC power or on internal battery power. This chapter tells you how you can effectively manage power. To maintain optimal battery performance, it is important that you use the battery in the proper way.
Page 68: Ac Adapter
AC Adapter CAUTION: The AC adapter is designed for use with your computer only. Connecting the AC adapter to another device can damage the adapter. The AC power cord supplied with your computer is for use in the country where you purchased your computer.
Page 69: Battery Pack
Battery Pack The battery pack is the internal power source for the computer. It is rechargeable using the AC adapter. The operating time of a fully charged battery pack depends on how you are using the computer. When your applications often access peripherals, you will experience a shorter operating time.
Page 70: Initializing The Battery Pack
CAUTION: After the computer has been fully recharged, do not immediately disconnect and reconnect the AC adapter to charge it again. Doing so may damage the battery. NOTE: The battery level may automatically lessen due to the self-discharge process (0.21 % per day), even when the battery pack is fully charged (100 %). This happens no matter if the battery pack is installed in the computer.
Page 71: Replacing The Battery Pack
By Operating System You can check the approximate battery level using the battery meter function of the operating system. To read the battery level in Windows Vista, click the icon on the system tray. To read the battery level in Windows XP, click the icon on the taskbar.
Page 72 To replace the battery pack, follow these steps: 1. Make sure that the computer is not turned on or connected to AC power. 2. Place the computer upside down. 3. Slide the battery security lock outward to the unlock ( ) position ( ).
Page 73: Battery Low Signals And Actions
Battery Low Signals and Actions For Windows XP Battery Low occurs when the battery has approximately 10 % (Windows default setting) of its charge remaining. The computer gives warning beeps or messages. NOTE: You can set up your threshold and signals of Battery Low under Windows XP. For Windows Vista The battery icon changes appearance to display the current state of the...
Page 74: Power Management
Power Management Your computer supports ACPI (Advanced Configuration and Power Interface) for power management. The power management feature allows you to reduce the power consumption for energy saving. With an ACPI-compliant operating system such as Windows Vista/XP, power supply to different computer components is controlled on an as-needed basis.
Page 75: Hibernation
Hibernation NOTE: When using Windows Vista, make sure that the hibernation feature is enabled in the “When I press the power button,” “When I press the sleep button,” and “When I close the lid” of the Power Options System Settings Properties from the Control Panel Mobile PC.
Page 76: Power-Saving Tips
Power-Saving Tips Aside from enabling your computer’s power saving mode (see previous section), you can do your part to maximize the battery’s operating time by following these suggestions. Do not disable Power Management. Choose a power plan that saves power when using Windows Vista. A power plan is a collection of hardware and system settings that control how your computer manages power.
Page 77: Expanding Your Computer
Chapter 4 CHAPTER Expanding Your Computer You can expand the capabilities of your computer by connecting other peripheral devices. When using a device, be sure to read the instructions accompanying the device together with the relevant section in this chapter. This chapter gives guidelines on installing and using these devices: External monitor USB device...
Page 78: Connecting An External Monitor
Connecting an External Monitor If you want the benefits of a larger display screen with higher resolution, you can connect an external CRT monitor or LCD monitor to your computer. Follow this procedure to connect an external monitor: 1. Make sure that the computer is not turned on. 2.
Page 79: Connecting A Usb Device
Connecting a USB Device Your computer has three USB ports for connecting USB devices, such as a digital camera, scanner, printer, modem, and mouse. The USB ports support transfer rates up to 12 MB/s for USB 1.1 devices and 480 MB/s for USB 2.0 devices. To connect a USB device, simply plug the device cable to one of the USB ports.
Page 80: Using Smart Cards
Using Smart Cards Your computer has a smart card slot for additional security feature, providing tamper-proof storage of user and account identity. A smart card is a type of plastic card embedded with a computer chip that stores and transacts data between you (user) and the computer. You need to install third-party smart card software to take advantage of the smart card feature.
Page 81 To remove a smart card: 1. Make sure that the third-party smart card software is not accessing the smart card. 2. Pull the card out of the slot. Expanding Your Computer...
Page 82: Using Pc Cards
Using PC Cards Your computer has a PC card slot which supports type II card and CardBus specifications. Inserting and Removing a PC Card NOTE: Some PC cards require additional system resources. Before using such PC card, you may have to free other system resources for the PC card. Although some PC cards can be inserted and removed without turning off the computer, you cannot remove or install PC cards during Sleep mode.
Page 83 To remove a PC card: 1. Double-click on the Safely Remove Hardware icon found on the Windows Vista taskbar ( icon found on the Windows XP taskbar) and the Safely Remove Hardware window appears on screen. 2. Select (highlight) the PC card from the list to disable the card. 3.
Page 84: Using The Card Reader
Using the Card Reader NOTE: To take advantage of the Card Reader, the Card Reader driver supplied with your computer must be installed. (See chapter 6 for details.) If your hard disk is divided into several drives, make sure that all drives have been formatted before using the Card Reader.
Page 85 To insert a storage card: 1. Locate the Card Reader slot on the left side of the computer. 2. Align the card with its connector pointing to the slot and its label facing up. Slide the card into the slot until it reaches the end. 3.
Page 86: Internal Components Upgrade
Internal Components Upgrade You can upgrade your computer by changing the CPU and hard disk or adding memory. However, to avoid damage during the installation procedure, please ask your dealer for help. Do not install an internal component by yourself. Expanding Your Computer 4-10...
Page 87: Using Bios Setup
Chapter 5 CHAPTER Using BIOS Setup BIOS Setup Utility is a program for configuring the BIOS (Basic Input/ Output System) settings of the computer. BIOS is a layer of software, called firmware, that translates instructions from other layers of software into instructions that the computer hardware can understand.
Page 88: When And How To Use Bios Setup
When and How to Use BIOS Setup When to Use You need to run BIOS Setup Utility when: You see an error message on the screen requesting you to run BIOS Setup Utility. You want to restore the factory default settings. You want to modify some specific settings according to the hardware.
Page 89 The BIOS Setup Utility screen can be divided into three areas: On the top is the menu bar containing the titles of the available menus. Each menu title brings a specific menu. The left column of the menu displays the menu items. The top-right of the menu provides more detailed information when a menu item is highlighted.
Page 90: Moving Around And Making Selections
Moving Around and Making Selections You must go through two or three levels to complete the setting for an item. In most cases, there are three levels: menu title, pull-down menu, and submenu. Use the keyboard to move around and make selections. Keyboard information can be found at the bottom of the screen.
Page 91: Main Menu
Main Menu The Main menu contains the system date and time settings as well as shows the basic configuration of the system. System Time sets the system time. System Date sets the system date. Using BIOS Setup...
Page 92: Advanced Menu
Advanced Menu The Advanced menu contains various system settings. Legacy USB Support allows you to enable support for Legacy USB device in DOS mode. Boot-time Diagnostic Screen allows you to display the diagnostic screen during system boot. Quick Boot Mode allows the system to skip certain tests while booting. This will decrease the time needed to boot the system.
Page 93: Security Menu
Security Menu TPM is a component on your computer’s mainboard that is specifically designed to enhance platform security above-and-beyond the capabilities of today’s software by providing a protected space for key operations and other security critical tasks. Using both hardware and software, TPM protects encryption and signature keys at their most vulnerable stages –...
Page 94: Boot Menu
Boot Menu The Boot menu sets the sequence of the devices to be searched for the operating system. The bootable devices will be automatically detected during POST and shown here, allowing you to set the sequence that the BIOS use to look for a boot device from which to load the operating system.
Page 95: Exit Menu
Exit Menu The Exit menu displays ways of exiting BIOS Setup Utility. After finishing with your settings, you must save and exit so that the changes can take effect. Exit Saving Changes saves the changes you have made and exits BIOS Setup Utility.
Page 96: Installing Software Drivers And Using The P1 Utility
Chapter 6 CHAPTER Installing Software Drivers and Using the P1 Utility To take full advantage of the unique features of your computer, some operating systems require custom software, known as drivers, to be installed. If you purchased the computer with Windows pre-installed, your dealer may have already installed the drivers.
Page 97: How To Use The Driver Disc
How to Use the Driver Disc NOTE: The drivers may have been updated after this manual was published. For driver upgrade, please contact your dealer. This disc supports Windows Vista only. The available items may differ according to your computer model. Do not remove the driver disc when installing the driver.
Page 98 Click NEXT located on the right lower part of main screen to view the next screen as shown next. Click BACK to return to the main screen. Installing Software Drivers...
Page 99: Installing Drivers
Installing Drivers To install the intended driver, click on the particular item and installation will start. The drivers are described next: Name Description Chipset Ensures the full function of the following drivers. Install this driver before installing the other device drivers. Installs the video driver that allows you to select high-resolution displays with richer colors.
Page 100 Name Description (on-screen display) on the computer. 3G (optional) Installs the 3G driver that allows you to use the 3G feature. Acrobat Installs the Adobe Acrobat Reader program if you do not have it on your computer. You need Adobe Acrobat Reader to open the manual file supplied on this driver disc.
Page 101: P1 Quick Launch Key Utility
P1 Quick Launch Key Utility By default, P1 is assigned as Microsoft® Internet Explorer quick launch key. The quick launch key utility that allows you to re-define the P1 quick launch key. To start the utility, right-click the System utility icon ( ) and select Quick Button Definition on the Windows system tray.
Page 102 Defining the buttons: The box in the window represents the user-definable button. To assign a program to a button, click the Open icon to pop up the Select a File to Open dialog box as shown next and select the desired program.
Page 103: Caring For The Computer
Chapter 7 CHAPTER Caring for the Computer Taking good care of your computer will ensure a trouble-free operation and reduce the risk of damage to your computer. This chapter gives you guidelines covering these areas of maintenance: How to protect the computer What to note when using and storing the computer How to clean the computer What to note when using the battery pack...
Page 104: Protecting The Computer
Protecting the Computer To safeguard the integrity of your computer data as well as the computer itself, you can protect the computer in several ways as described in this section. Using the Windows Vista Security Center Windows Security Center protects your computer against intrusion. Caring for the Computer...
Page 105: Using The Password
Windows Security Center alerts you to take action on the following security essentials: Windows Firewall Windows Update Malware Protection (anti-virus, anti-spyware) Others (Internet security, user account control) For detailed information on Windows Security Center, see Windows’ Vista Help. Using the Password The power-on password protects your computer against unauthorized use.
Page 106: Using The Cable Lock
Using the Cable Lock You can use a Kensington-type cable lock to protect your computer against theft. The cable lock is available in most computer stores. To use the lock, loop the lock cable around a stationary object such as a table.
Page 107: Taking Care Of The Computer
Taking Care of the Computer Location Guidelines Use the computer where the temperature is between 10 °C (50 °F) and 35 °C (95 °F). Avoid placing the computer in a location subject to high humidity, extreme temperatures, mechanical vibration, direct sunlight, or heavy dust.
Page 108: Cleaning Guidelines
Cleaning Guidelines Never clean the computer with its power on. Use a soft cloth moistened with water or a non-alkaline detergent to wipe the exterior of the computer. Gently wipe the display with a soft, lint-free cloth. Do not use alcohol or detergent on the display.
Page 109: When Traveling
When Traveling Before traveling with your computer, make a backup of your hard disk data into flash disks or other storage devices. As an added precaution, bring along an extra copy of your important data. Make sure that the battery pack is fully charged. Make sure that the computer is turned off and the top cover is securely closed.
Page 110: Troubleshooting
Chapter 8 CHAPTER Troubleshooting Computer problems can be caused by hardware, software, or both. When you encounter any problem, it might be a typical problem that can easily be solved. This chapter tells you what actions to take when solving common computer problems.
Page 111: Preliminary Checklist
Preliminary Checklist Here are helpful hints to follow before you take further actions when you encounter any problem: Try to isolate which part of the computer is causing the problem. Make sure that you turn on all peripheral devices before turning on the computer.
Page 112: Solving Common Problems
Solving Common Problems For easy reference, the problems are divided into these categories. Problem Type Go to Battery Problems P. 8-4 DVD Drive Problems P. 8-4 Display Problems P. 8-5 Hardware Device Problems P. 8-6 Hard Disk Drive Problems P. 8-7 Keyboard, Mouse, and Touchpad Problems P.
Page 113: Battery Problems
Battery Problems The battery does not charge (Battery Charge indicator does not light red). Make sure that the AC adapter is properly connected. Make sure that the battery is not too hot or cold. Allow time for the battery pack to return to room temperature. Make sure that the battery pack is installed correctly.
Page 114: Display Problems
You cannot eject a disc. The disc is not properly seated in the drive. Manually release the disc following the method described next: 1. Disconnect the drive from the computer. 2. Insert a small rod, such as a straightened paperclip, into the drive’s manual eject hole and push firmly to release the tray.
Page 115: Hardware Device Problems
Bad dots appear on the display at all times. A small number of missing, discolored, or bright dots on the screen are an intrinsic characteristic of TFT LCD technology. It is not regarded as a LCD defect. The external monitor displays nothing. Make sure that the monitor is turned on.
Page 116: Hard Disk Drive Problems
Hard Disk Drive Problems The hard disk drive error message appears on the screen. The hard disk drive has defects. Ask your dealer for help. The hard disk drive operations seem slow. The data files stored on the hard disk drive may be fragmented. Use a tool such as Window’s Disk Defragmenter to defragment the files.
Page 117: Lan Problems
LAN Problems I cannot access the network. Make sure that the LAN driver is correctly installed. Make sure that the LAN cable is properly connected to the RJ-45 connector and the network hub. Make sure that the network configuration is appropriate. Make sure that the user name or password is correct.
Page 118: Modem Problems
Make sure that the SSID setting is the same for every WLAN device in the network. Your computer is not recognizing changes. Restart the computer. Make sure that the IP address or subnet mask setting is correct. I cannot communicate with the computer in the network when Infrastructure mode is configured.
Page 119: Power Management Problems
Make sure that the telephone line is properly connected. Make sure that the COM port in the communication software is correctly set. Turn off power management. Power Management Problems The computer does not enter Sleep/Standby or Hibernation mode automatically. If you have a connection to another computer, the computer does not enter Sleep/Standby or Hibernation mode if the connection is actively in use.
Page 120: Software Problems
Software Problems An application program does not work correctly. Make sure that the software is correctly installed. If an error message appears on the screen, consult the software program’s documentation for further information. If you are sure the operation has stop, reset the computer. (See “Resetting the Computer”...
Page 121: Startup Problems
Check the volume control of your computer. Startup Problems When you turn on the computer, it does not respond and the Power Indicator does not light blue. If you are using an external AC power, make sure that the AC adapter is correctly and securely connected.
Page 122 After you have performed everything as described above and still have the incorrect date and time every time you turn on the computer, the RTC (Real-Time Clock) battery is at the end of its life. Call an authorized dealer to replace the RTC battery. Troubleshooting 8-13...
Page 123: Resetting The Computer
Resetting the Computer You may have to reset (reboot) your computer on some occasions when an error occurs and the program you are using hangs up. If the computer operation seems to hang up, first wait. It is possible that the computer is processing data.
Page 124: Appendix A Specifications
Appendix A APPENDIX Specifications NOTE: Specifications are subject to change without any prior notice. Parts Specifications Intel® McCaslin Stealy processor 800 MHz 400 MHz FSB (Front Side Bus), Thermal specifications 3 W L2 Cache 512 KB ROM BIOS 1 MB EEPROM, ACPI, Fingerprint and TPM security System Up to 1 GB, DDRII 533/667 MHz SO-DIMM Display...
Page 125 Parts Specifications Wireless LAN One mini PCI-E slot for wireless LAN card, compliant with IEEE 802.11a/b/g/n Bluetooth Specification 2.0 module 3G (optional) Externally accessible SIM card slot Security Fingerprint sensor slide-type, TPM 1.2 Power AC adapter Universal AC adapter 45 Watt; input: 100∼240 Volt, output: 15 Volt Battery 3/6-cell Li-ion battery 2600/5200 mAh Dimension (W×D×H)
Page 126: Appendix B Regulatory Information
Appendix B APPENDIX Regulatory Information This appendix provides regulatory statements and safety notices on your computer. NOTE: Marking labels located on the exterior of your computer indicate the regulations that your model complies with. Please check the marking labels and refer to the corresponding statements in this appendix.
Page 127: On The Use Of The System
On the Use of the System Class B Regulations Federal Communications Commission Radio Frequency Interference Statement NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Page 128: Safety Notices
Canada Canadian Department of Communications Radio Interference Regulations Class B Compliance Notice This Class B digital apparatus meets all requirements of the Canada Interference-Causing equipment regulations. Cet appareil numérique de Classe B respecte toutes les exigences du Règlement Canadien sur le matériel brouileur. This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications.
Page 129 ENGLISH CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the equipment manufacturer. Discard used batteries according to manufacturer's instructions. DEUTSCH VORSICHT: Explosionsgefahr bei unsachgemäßem Austausch der Batterie. Ersatz nur durch denselben oder einen vom Hersteller empfohlenen gleich-wertigen Typ.
Page 130 About the Modem Caution Never install telephone wiring during a lightning storm. Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations. Never touch non-insulated telephone wires or terminals unless the telephone line has been disconnected at the network interface. Use caution when installing or modifying telephone lines.
Page 131: On The Use Of The Rf Device
On the Use of the RF Device The WLAN Card installed in this device and marketed in the USA and Canada does not support nor function in the extended channels (12ch, 13ch). HSDPA employed in this devise is 3GPP Release 5. USA and Canada Safety Requirements and Notices RF Exposure Warning: This equipment complies with FCC radiation exposure limits set forth for...
Page 132 Do not operate the radio or attempt to transmit data unless the antenna is connected; if not, the radio may be damaged. Use in specific environments: The use of wireless devices in hazardous locations is limited by the constraints posed by the safety directors of such environments. The use of wireless devices on airplanes is governed by the Federal Aviation Administration (FAA).
Page 133 EMC Requirements This device uses, generates and radiates radio frequency energy. The radio frequency energy produced by this device is well below the maximum exposure allowed by the Federal Communications Commission (FCC). This device complies with the limits for a Class B digital device pursuant to Part 15 subpart C of the FCC Rules and Regulations.
Page 134: European Union Ce Marking And Compliance Notices
Canada Radio Frequency Interference Requirements To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing. Pour empêcher que cet appareil cause du brouillage au service faisant l'objet d'une licence, il doit être utilisé...
Page 135 Greek To προϊόν αυτό πληροί τις προβλέψεις της Ευρωπαϊκής Οδηγίας 1999/5/EC. Icelandic Þessi vara stenst reglugerð Evrópska Efnahags Bandalagsins númer 1999/5/EC. Italian Questo prodotto è conforme alla Direttiva Europea 1999/5/EC. Norwegian Dette produktet er i henhold til bestemmelsene i det europeiske direktivet 1999/5/EC.
Page 136 The European variant is intended for use throughout the European Economic Area. However, authorization for use is further restricted in particular countries or regions within countries, as follows: General European standards dictate maximum radiated transmit power of 100 mW Effective Isotropic Radiated Power (EIRP) and the frequency range 2400 –...
Page 137 Departments in Which the Wireless LAN Module’s Maximum EIRP Not Shown in the Previous Table Frequency Ranges (MHz) Indoors Outdoors 2400 – 2446.5 10 mW Not permitted 2446.5 – 2483.5 100 mW 100 mW on private property with Ministry of Defense approval Turning Off the Wireless LAN Radio NOTE: Turning the wireless LAN radio off is not the same as disabling the wireless LAN card.
Page 138: 电子信息产品有毒有害物质或元素名称及含量标示
电子信息产品有毒有害物质或元素名称及含量标示有毒有害物质或元素项目部件名称铅镉汞六价铬多溴联苯多溴二苯醚 (Pb) (Cd) (Hg) (Cr+6) (PBB) (PBDE) 金属机构件塑料机构件电路板组件液晶面板硬盘光驱键盘充电电池组件适配器电源线外部信号连接线钮扣电池风扇散热模块 (金属部分) 喇叭 O : 表示该有害物质在该部件所有均质材料中的含量均在 SJ/T 11363-2006 规定的限量要求以下。 X : 表示该有害物质至少在该部件的某一均质材料中的含量超出...
Page 139 使用除外项目如下： 1. 铅使用于部件、装置的内部连接用高融点锡焊上（铅为 85wt% 以上的有铅锡焊）。 2. 电子陶瓷部件（压电组件・陶瓷介质材料等）内的含铅量。 3. 电子部件的玻璃内的含铅量。 4. 两种以上元素组成之焊料，用于连接微处理器封装与针头且铅含量超过 80wt% 并少于 85wt%。 5. 铅于覆晶集成电路封装内用于铸模与基板之电子接点之焊锡。 6. 于钢材、铝材、铜材中的含铅量。 7. 通孔盘状及平面数组陶瓷多层电容器焊料所含的铅。 8. 电子接点的电镀，其要求高可靠性，且没有替代性材料之镉。 9. 电池内的含铅量。 10. 电池内的含镉量。 11. 使用于钮扣电池之含汞量。 Regulatory Information B-14...
Page 140: Index
Index Taking care, 3-3, 7-6 Troubleshooting, 8-4 —A— Battery power Indicator, 1-13 BIOS Setup, 5-1 AC adapter, 3-2, A-2 Exiting, 5-10 Connecting, 1-2 Legacy USB, 5-6 AC power Password, 5-8 Connecting, 1-2 Starting, 5-2 Indicator, 1-13 Bluetooth wireless feature ACPI, 3-7 Connecting to Bluetooth device, 2-23 Adobe Acrobat Reader, 6-4 Driver installation, 6-4...
Page 141 Click, 2-9 European Union Combo drive. See DVD drive CE marking and compliance notices, Connecting external device Monitor, 4-2 Euro symbol, 2-7 USB device, 4-4 External monitor Connector Connecting, 4-2 Audio output, 1-9, 2-16 Microphone, 1-9, 2-16 —F— RJ-11, 1-7 RJ-45, 1-7 Copyright protection Macrovision Corp., 2-11...
Page 142 —K— —O— Kensington lock, 1-8, 7-4 Operating system, 1-5, 2-2 Keyboard, 1-12, 2-5 Troubleshooting, 8-7 —P— —L— Password, 5-8 PC card, 4-5 LAN, 2-19 Inserting, 4-6 Connector, 1-7 Removing, 4-6 Driver installation, 6-4 Slot, 1-7 Troubleshooting, 8-8 Troubleshooting, 8-6 LCD, 1-12, 2-13, A-1 Point, 2-9 Switching on and off with hot key, 2-7 POST, 1-5...
Page 143 Security Power Management problem, 8-10 Protecting the computer with lock, 7-4 Software problem, 8-11 Protecting the computer with password, Sound problem, 8-11 Startup problem, 8-12 Shutting down, 1-5, 2-2 Touchpad problem, 8-7 Simultaneous display, 2-13 WLAN problem, 8-8 Sleep, 2-2, 3-7 Turning off, 1-5, 2-2 Troubleshooting, 8-10 Turning on, 1-4...
Page 144 Index...

Getac Technology 8212X User Manual

Appendix A Specifications

Appendix B Regulatory Information

Quick Links

Need help?

Questions and answers

Related Manuals for Getac Technology 8212X

Summary of Contents for Getac Technology 8212X

Table of Contents