If The Wi-Fi Connection Cannot Be Established - Panasonic HC-V250 Basic Operating Instructions Manual

If the Wi-Fi connection cannot be established

Problem
It cannot connect
to the wireless
access point.
The wireless
access point is not
detected.
Radio waves of the
wireless access
point get
disconnected.
(General)
≥ Turn ON the wireless access point.
≥ Approach the wireless access point and reconnect.
≥ If it takes time to complete the connection, the Wi-Fi connection will be
aborted.
Reset the connection settings.
≥ Check how to connect to the wireless access point and how to set the
security settings.
≥ Make sure the wireless access point is registered in this unit.
≥ The device may be unable to locate the wireless access point due to
problems with the signal. Use [Set Manually].
([Easy Connection (WPS)])
≥ Make sure the wireless access point is in the correct WPS standby
mode.
≥ Make sure the PIN code has been correctly input.
([Search] or [Set Manually])
≥ Make sure the SSID and Password have been correctly input.
≥ Check the Authentication method, Encryption type, and Encryption
key (Password).
≥ The condition may improved by moving the location or changing the
angle of the wireless access point.
≥ If you use another 2.4 GHz band device such as a microwave oven or
cordless telephone nearby, you may interrupt the signal. Keep a
sufficient distance from these types of devices.
Check points
23
(ENG) SQT0012