Table of Contents
Advertisement
VLAN ID
Enter the VLAN ID of the SSID.
Used to tag packets which are received from the wireless
clients of the SSID and sent from Ethernet or WDS
interfaces.
Applicable only when VLAN function is enabled. VLAN
function can be configured in Configuration -> LAN ->
Network Setup screen.
Max Clients
Enter the number of clients that can connect to the SSID. The
range is from 0 to 32 and 0 means no limit.
Security
Go to Configuration > Wireless > Security to configure security settings of SSIDs to provide data
protection over the wireless network.
Security
Select SSID
Security Mode
Security Mode
•
Disabled - No security. Anyone using the correct SSID can connect to your network.
WEP - The 802.11b standard. Data is encrypted before transmission, but the
•
encryption system is not very strong.
Select the desired SSID from the drop-down list.
Select the desired security method from the list.
49
Advertisement
Table of Contents
